User manual LENCO MDV-3

[. . . ] MDV-3 Home Cinema Set -1- FORW AWRD WELCOME Thank you for purchasing this product. It is recommended that you read this instruction manual before use to ensure safe and enjoyable operation. PLEASE Please unpack carefully, and keep all the accessories in the same place. Do not place objects filled with liquids, such as vases, on this unit. Do not place naked flame sources, such as lighted candles on this unit. [. . . ] Select band by pressing Tune- or Tune+ button: under some frequency, press the button, the frequency will be up or down on the step. Select band by pressing number buttons: you may select the bands that have been saved by pressing the number buttons. For example: press 10+ button twice, 5 button once, you may select the 25th band. 4) Automatically search bands: press the Search button, this unit will start to search bands from the lowest part to highest part automatically. Save Bands Press the Save button, will appear on the VFD, that means that saving the current frequency of band. For example: If you want to save 99. 3 MHz in 28th, please press 10+ button twice, 8 button once, then press T/F button to input 993, then press Save button to save this frequency. Soundtrack Selection Press L/R(MO/ST) button, you may select Mono and Stereo soundtrack output in FM status. Exit FM/AM Status Press the Play/Enter button to exit FM/AM status and enter the disc playing. If the signal is not strong enough, you cannot select Hints for better Reception: Please vary the direction of the antenna to find the strongest signal for each station. - 15 - MENU SETUP Press the Setup button on the remote controller to open the menu setup function, the TV screen will display the following figures, SYSTEM SETUP PAGE 1). TV System perform adjustment according to different disc applicable for different TV system, includes four options: NTSC, PAL, PAL60, AUTO. Screen Saver this option is used to open or close screen saver program, includes: ON and OFF. Video Output according to your requirement, you can input different video source, includes 5 modes: INTERLACE-YUV, S-VIDEO, P-SCAN, S-VIDEO, PC-VGA (1) (2) INTERLACE-YUV: this option can be chosen if Y, Cb, Cr are connected with TV P-SCAN: this option can be chosen when Y, Pb, Pr are connected with TV and the TV is set in P-SCAN mode. NOTE: only when the TV has progressive scan function, you can use P-SCAN. TV Type please select the right screen type according to your TV, including 3 options, 4:3 LB: mailbox format, the picture data will panoramic and scanning format will be played in this format. 1) 4:3 PS: for regular TV, the picture data with panoramic and scanning format will be played in this format. Such setting will not affect the normal size of the picture data. - 16 - MENU SETUP 5). Password and Rating The password is used to prevent the children watching unproper discs. Note: you cannot play the discs with a rating higher than your set rating, unless input the correct password upon the system prompt. Note: rating selection can be done only when the password lock is open. And only when the password lock is locked, the rating restriction can take effect. Default Value This option is used to store all the preset values for menu setup. (The initial password of this unit is 0000. ) (2) move the cursor to Rating option, press Play/Enter button to select the desired LANGUAGE SETUP PAGE 1). OSD Language This option is used to select the language for menu and other screen displays, includes English, Chinese, German, Spanish, French, Portuguese, Italian, Dutch. [. . . ] Available options: Stereo, Downmix, left soundtrack and right soundtrack. The pictures above will appear on the TV screen in case of menu setup. Every time a picture is chosen, you can use the direction buttons or Play/Enter button to switch over to a certain picture you are to set, then use the direction buttons to move the cursor onto a specific directory, press the left direction button to enter the subdirectory and press the up / down direction button to change various status of a specific item. And press the left direction button to return back to the upper level directory. [. . . ]