User manual LENCO MC-129 MP3

[. . . ] STANDBY INDICATOR 10. LCD DISPLAY 11. CD COMPARTMENT 12. REMOTE SENSOR 13. VOLUME UP/DOWN CONTROL 14. BATTERY COMPARTMENT INTRODUCTION Thank you for purchasing this product. Please read through these operating instructions, so you will know how to operate your equipment properly. After you finished reading the instructions manual, put it away in a safe place for future reference. [. . . ] Adjust the volume to your desired listening level. AUTOMATIC STOP FEATURE When the cassette deck is operating in play or record mode and the end of the tape is reached, the unit automatically shuts itself off and returns all buttons to the off position. Tune in to desired station by pressing the TUNING CONTROL/CD SKIP UP/DOWN CONTROL. To hear what you recorded, press the REWIND key to start recording point, follow instructions in PLAYING A CASSETTE TAPE. NOTE: PAUSE FOR A MOMENT - Using the PAUSE key on the cassette deck instead of the STOP/EJ. key to momentarily interrupt recording gives you a much clear recording. RADIO RECORDING TIPS To temporarily pause the recording, press PAUSE key on the cassette deck. Open the disc compartment and load a disc and select the desired track you want to record. Press RECORD key and the PLAY key will automatically engage to begin recording. To hear what you recorded, press the REWIND key to start recording point, follow instructions in PLAYING A CASSETTE TAPE. AUTOMATIC LEVEL CONTROL (ALC) This unit has the latest circuitry-Auto Level Control (ALC), While recording, adjusting the VOLUME control will not affect the recording volume, it keeps in a right and flat volume. USING THE CD/MP3 LOADING A DISC 1. Example : 11 CD READ , then the total number of tracks and playing time will appear in the 47: 12 5. To remove the CD, press OPEN to open CD compartment lid, the display will show OPEN . Note: To ensure good system performance; wait until the disc tray completely reads the disc before proceeding. If no disc loaded into the compartment, or the disc is unreadable, the display will show no disc. E-5 PLAYING A DISC 1. To stop playback, press STOP button, the total number of tracks and playing time will appear in the display SELECTING A DESIRED TRACK/PASSAGE To select a desired track Press TUNING CONTROL/CD SKIP UP/DOWN CONTROL button repeatedly in stop mode or during playing until the desired track appears on the display. To search for a particular passage during playback( track scanning at high speed) Press and hold TUNING CONTROL/CD SKIP UP/DOWN CONTROL button to scan the current playing track at high speed until desired point(passage), then release the button. PROGRAM TRACKS Program tracks of disc are possible when playback is stopped. In stop mode, press MEMORY button to enter program setting, the display will show 00 P -- 01. Press TUNING CONTROL/CD SKIP UP/DOWN CONTROL to select the first desired track to be programmed. 06 Repeat steps 2 & 3 to store other desired tracks until all tracks programmed. Press PLAY/PAUSE button to start playback from the first programmed track. [. . . ] , Biasing System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AUDIO SECTION Power output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Speaker Impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]