User manual LENCO KDV-309

[. . . ] User Manual KITCHEN DVD/CD PLAYER WITH RADIO ALARM & DVB-T RECEPTION AND REMOTE CONTROL MODEL: KDV-309 SELECT READ THESE INSTRUCTIONS INCLUDED IN THIS IM THOROUGHLY PRIOR TO CONNECTING AND OPERATING. PLEASE RETAIN THIS MANUAL IN CASE YOU MAY NEED IT FOR FUTURE REFERENCE. THE ILLUSTRATIONS & GRAPHICS HEREIN ARE FOR REFERENCE ONLY AND SUBJECT TO CHANGE WITHOUT NOTICE. SAFETY INFORMATION CAUTION: THIS PLAYER IS A CLASS 1 LASER PRODUCT THAT USES A VISIBLE LASER BEAM THAT COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. WHEN THIS PLAYER IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS PLAYER. [. . . ] KODAK PICTURE CD / JPEG CD PLAYBACK Slide show of Kodak Picture CD after being loaded begins automatically; Folders of JPEG picture CD after being loaded are displayed on the TV screen; use the NAVIGATION buttons to select the desired pictures to start playback. When the password is changed, you are needed to input the new one to unlock the system. 1. 4. 3 Once you forget your own password, use the supervisor's password "8200" to unlock it. NOTE: If wrong password was input in unlock status, the system will lock. If you want to change the rating of parental lock, please input the password to unlock first. Options: 1 KID SAFE / 2 G / 3 PG / 4 PG 13 / 5 PG-R / 6 R / 7 NC-17 / 8 ADULT 1. 6 DEFAULT - Reset to factory settings. LANGUAGE SETUP 2. 1 OSD LANGUAGE - It is used to select different On Screen Display language for different user. (DVD only, need disc software support) 2. 3 SUBTITLE LANG - Select preferred subtitle language. (DVD only, need disc software support) 2. 4 MENU LANG - Select preferred disc menu language. (DVD only, need disc software support) 2. 5 EXIT SETUP - Select it to exit the setup menu. Options: 0/2/4/6/8/10/12 3. 2 CONTRAST - To set the contrast effect for display. Options: 0/2/4/6/8/10/12 3. 3 HUE - To set the colour impression for display. Options: -6/-4/-2/0/+2/+4/+6 3. 4 SATURATION - to set the saturation level for display. Options: 0/2/4/6/8/10/12 3. 5 EXIT SETUP - Select it to exit the setup menu. INITIAL SETTINGS Initial settings page is for you to make your preferred settings up for your player. Once the initial settings are done they are retained in the CPU of the player until otherwise modified. GB-5 4. SPEAKER SETUP 4. 1 DOWNMIX Options: LT/RT - Left/Right mix mode STEREO - Stereo mode 4. 2 EXIT SETUP - Select it to exit the setup menu. RADIO OPERATION TO PLAY THE RADIO 1. Press FUNCTION button repeatedly to switch to RADIO mode (At the moment, the TFT display will be turned off), the radio Indicator will light up and the LCD shows the current frequency and band. Select the desired band with STOP/BAND button until your desired band shows in the LCD. Tune to the desired station by pressing TUNER UP/DOWN button (Press TUNER UP/DOWN button repeatedly until you get the strongest clearest sound). When receiving a FM ST station, the relative icon will show in the LCD. When receiving an FM broadcast, unfold the FM antenna and place it in the best position for the best reception. For AM broadcasts, rotate AM antenna until the best reception is heard. [. . . ] Default setup - select this option to restore the factory setting. 1. When this player is connect to the outdoor aerial, make sure that the TV programme is available from the signal tower. When this player is connect to the outdoor aerial, in avoid that the huge buildings or obstacle would block the signal. Note: In some areas the indoor aerial terminal may different, if the terminal is not fitted to your player, a connector is available for you to connect between Cable and player. [. . . ]