User manual LENCO IPD-4300

[. . . ] Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. [. . . ] E. The unit exhibits a marked change in performance or does not operate normally. Periods of Nonuse If the unit is to be left unused for an extended period of time, such as a month or longer, the power cord should be unplugged from the unit to prevent damage or corrosion. Environment Attention should be drawn to the environmental aspects of the use of apparatus in moderate climates. Servicing The user should not attempt to service the unit beyond those methods described in the user's operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. 4 5 Features Thank you for purchasing this Digital Music Audio System, it incorporates following features : Different iPod models Player / Re-charger Interchangeable iPod Adaptors Audio line-in for connecting other digital audio player Built-in 2 High Fidelity Speakers Remote Control Operation iPod, iPod mini, iPod nano, iPod touch, iPod classic and iPod shuffle are trademarks of Apple Computer Inc. , registered in the U. S. iPod is not included + Description of Parts Main Unit Top view Front view 2 1 6 5 Installation AC power Connection Connect the AC power plug into AC main outlet. 3 4 Rear view 8 AUX Firmly plug into AC main outlet 7 Remote Control (1) The battery compartment is located at the back of the remote control. (3) Follow the polarity marked on the compartment and install two pieces of type UM-4 (AAA) battery into it. - / + button ----- Adjust volume level up or down 4. Standby button and Standby indicator -----To turn the unit on and off ; When the unit is at standby mode, the standby LED is on. 5. Remote Control Infrared sensor 6. Pair of Speakers 7. Power On / Off switch ----- To switch the power on and off 8. AUX jack ---- Auxiliary audio signal input 9. AC Power cord 7 9 REMOTE CONTROL 1 Listening to iPod 2 OK 1. Infrared Transmitter 2. Standby button ---- To turn the unit on and off 4 3. iPod Menu button 4. iPod OK button 7 5. iPod Play / Pause button 6 6. iPod Backward / Forward button 7 7. VOL + / - button ----- Adjust volume 10 level up or down 8. iPod Menu Up / Down button 9. iPod Random button 10. Mute button ---- Mute the volume 11. Battery Compartment ---- Located at the back of the remote control This model adopts different iPod models. 1. Select and insert the proper adaptor for your iPod model into the docking station first. Your iPod can now be inserted into the docking port by placing the conmnector on the bottom of the iPod onto connector in the docking bay. Caution : Please be careful when seating the iPod into the docking to avoid damaging the 30-pin connector on the iPod or in the docking system. 2. Switch the Power On/Off switch to on position , the front Standby LED indicator lights on. [. . . ] - Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors. - The above message will disappear from the iPhone screen after few seconds. The iPhone is still able to receive incoming calls while inserted in docking compartment. - The iPhone music selection can be operated by the remote control. Specifications Listening To An External Audio Source 1. Press the Standby button to turn on the unit and the Standby LED indicator turns off. [. . . ]