User manual LENCO GOTORADIO

[. . . ] Primary DNS: Enter the Domain Name System (DNS) address provided by your ISP. If connected to a gateway (router), enter the IP address of the gateway. Automatic ­ Select this item when connect internet via Broadband router with DHCP (Dynamic Host Configuration Protocol) server enabled. Connect to ISP ­ Select this item when the unit connect to ADSL/cable modem directly. [. . . ] DST mode (Daylight Saving Time Setting) DST mode: On For locations observe Daylight Saving Time like USA and Europe, during DST period, user turn on DST option for automatic DST time adjustment. GR-02 ATZ Ver 0. 4 28 AUG 2006 PROPRIETARY AND CONFIDENTIAL © ATZ LTD Page 5 of 8 GotoRadio Mode: In standby mode, press 'STANBY/SOURCE" button to turn on the system. Press 'STANDBY/SOURCE' button again until 'GotoRadio' appear from the screen. ASF streaming streaming audio The default is listening in 'PRESET' station mode. Use TRACK/CHANNEL knob or Channel +/- keys from remote handset to select preset station. Press 'PLAY/ENTER' key to connect to select Internet station. When link to station successfully, 'streaming' icon appear at the lower middle of LCD display. To SCAN all preset stations, press 'SCAN' key from remote or press 'SETTING' key from front panel and select 'SCAN' option. Press 'PLAY/ENTER' key to exit scan mode and listen to station in the last scan position. Users can connect to GotoRadio server to listen stations from server or update preset station from GotoRadio server. When connect to server, the system is listening in 'DIRECT' station mode. To enter 'DIRECT' mode, press 'PRESET/DIRECT' key from remote handset or press 'MENU' key from from panel and select 'DIRECT' mode option. 'Connecting . . . . . . ' advisory message from display and 'DIRECT' icon appear at the top right corner if LCD display. Once enter 'DIRECT' mode, user can navigate stations by category. Total number of station under this category display at second line of screen. To select station under category, press Channel +/- keys or turn the Track/Channel knob. To SCAN all stations under this category, press 'SCAN' key from remote or press 'SETTING' key from front panel and select 'SCAN' option. Press 'PLAY' key to exit scan mode and listen to station in the last scan position. To ADD/STORE station to local preset memory, press and hold 'PLAY/ENTER' key. Memory entry without any station will display 'Free Memory' advisory message. Select desire preset memory id by turning Track/Channel knob or press Channel +/- keys from remote handset. After finish preset memories update and/or DIRECT station listening, press 'PRESET/DIRECT' key from remote handset to change back to 'PRESET' station mode. From front panel, press 'MENU' key and select 'PRESET' option to change back to 'PRESET' station mode. GR-02 ATZ Ver 0. 4 28 AUG 2006 PROPRIETARY AND CONFIDENTIAL © ATZ LTD Page 6 of 8 SD Audio Mode: In standby mode, press 'STANBY/SOURCE" button to turn on the system. Press 'STANDBY/SOURCE' button again until 'SD Audio' appear from the screen. [. . . ] To SCAN all PRESET tracks sequence, press 'SCAN' key from remote or press 'SETTING' key from front panel and select 'SCAN' option. Press 'PLAY' key to exit scan mode and listen to track in the last scan position. Stock Info mode: In standby mode, press 'STANBY/SOURCE" button to turn on the system. 'STANDBY/SOURCE' button again until 'Stock Info' appear from the screen. Stock Info (Delayed Quote) In this mode, users can view "delayed quote data" from Internet. Press Note: All information provided "as is" for informational purposes only, not intended for trading purposes or advice. [. . . ]