User manual LENCO DVT-2632

[. . . ] This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. Do not exposed the unit to where there are extremes of temperature (below 5°C or exceeding 35°C) or moisture. Do not install this unit in a confined space, such as a bookcase or built-in cabinet. For sufficent ventilation, there should be at least 20 cm distance around the apparatus. [. . . ] Press [o/p] to select country, press [OK] or green button to enter Setup 3. Press GREEN button to start auto search, the picture appear as follows:. Note: The first time installation screen appears again, when the "reset" operation has been done, and then turn off and turn on the main unit. Make sure all necessary connections are correctly connected before turn on the power. SETUP The sleep timer automatically switches off the power after a preset time has elapsed. Press [SLEEP] on the remote control, the remain sleep time TV/RADIO appears on the screen for a few seconds. MUTE AUTO After selected "ATV" or "DTV" as input source, you can do Once [NICAM] is pressed, it alternates in the differentINPUT PMODE SMODE sound either one of followings to select your channel. Press [ ] to go back the previous MENU channel you've watched last time. The factory setting of OSD (On Screen Display) language is INDEX SIZE REVEAL "English". OK AUTO Press [MUTE ] on the remote control to switch off the sound temporarily. DVD OK Press SETUP this button again (or [+VOL]), the sound comes LCD back. When some menu option is gray displayed, that means the option is not available in current setting mode. ) After setting of an option is finished, press [LCD MENU] to exit stage by stage, while press [EXIT] to turn off OSD screen directly. If the current channel is already locked, press red button again will unlock. If the current channel already delete, press green button again will cancel delete . If one of the stations has been incorrectly placed in the station list, you may move it to the correct position. Use the cursor select the channel to be moved, press blue button, move the station to the new location and press OK], this will move the station to the new location. If the current channel already be one of your favorite channel, press red / green / yellow / blue button again will set it to a normal channel. Note: This is just an example for reference, different CI module will have different CI menu. Note: Before operating MEDIA menu, plug in USB device or memory card, then press [INPUT] to set the input source to Media. [. . . ] However, some DVD-RWs cannot be played back depending on the recording conditions. However, some DVD+R/+RWs cannot be played back depending on the recording conditions. Note: While in other function, it alternate to "DVD" function and starts playback automatically when insert a playable disc into the disc in/out slot. [CD] Press [l] to stop the playing back disc temporarily, press this button again to resume playback. [. . . ]