User manual LENCO DVD-51

[. . . ] DVD-51 SAFETY INFORMATION SPECIFICATIONS Card Reader Video Format The light flash with an arrowhead symbol, within an equilateral triang , is intend to alert the user to the le presence of uninsulated "dangerous voltage " within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within the equilatera triangle is intended to alert the user to the presence of important l operating and maintenance (servicing) instructions in the literature accompa nying the appliance. Use of controls , adjustment or the performance of procedures other than specifid may result here in hazardous radiation e exposure . FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to part 15 of the s FCC rule . [. . . ] Any barrier between the remote controller and remote sensor will inactivate any operation of the remote controller. The operating range between the remote controller and the equipment shall be no more than 5 meters (16 feet). When the operating range becomes shorter, replace the batteries with new ones. Highlight the AUDIO OUT option, and press the Arrow buttons to choose the audio output mode you prefer. Press Enter to confirm; There are 3optional audio output modes: ANALOG, SPDIF/ RAW, and SPDIF/ PCM. ANALOG: From the Coaxial Output jack and the Optical Output jack, no signal is output. SPDIF/ RAW: Choose this setting if your DVD player is connected to a power amplifier with a coaxial cable or an optical cable; When playing a disc recorded with Dolby Digital, DTS and MPEG audio formats, the corresponding digital signals will be output from the Coaxial Output jack or Optical Output jack. This player's digital output jacks are designed for a 16 DOWN MIX Use the Up and Down arrow button to move the scroll and adjust the saturation. LT / RT: Choose this setting, it will be sound like in a movie theatre if the original movie the disc was recorded from was encoded in the Pro Logic Dolby Digital format. STEREO: Choose this setting, when 5. 1-channel sound playing, two channels of signals will be output 5 SYSTEM CONNECTION 1. System connection DO NOT Connect the AC power socket to the wall outlet before the system connection is completed. SETUP MENU SYSTEM TV TYPE 16 : 9 (Wide Screen): Choose this setting if your DVD player is connected to a wide screen TV If you . choose this setting and you don't have a wide screen TV the images , on the screen may appear distorted due to vertical compression. connected to a normal ratio TV connector You'll see the movies in their original aspect ratio (height-towidth ratio). You'll see the entire frame of the movie, but it will take up a smaller portion of the screen vertically. The movie might appear with black bars at the top and bottom of the screen. 4 : 3 PS (Pan & Scan): Choosing this setting if your DVD player is . connected to a normal ratio TV You can fill the movie to the entire screen of your TV. This might mean that parts of the picture (the left and right edges) won't be seen. NOTES: The image display ratio is related to the recorded disc format. If you play a disc recorded in 4:3 format on a wide screen TV black , bars will appear on the left and right side of the screen. PASSWORD T he pa ss wo rd opti o n is i ni t i al i z e d locked, and you cannot set the ratings limit or change the password. In order f o r the Ratings feature work, t h e password mode must be turned on. If you want to set the ratings limit, you will need to enter the default password, which is 8888, then press Enter to confirm. To change the password, you will be prompted for the old password, then be prompted for a new . [. . . ] If PBC is on, it will turn off automatically when Search Playback starts. Changing the Soundtrack (compatible with SVCD, VCD, CD, HD-CD, MP3 discs 11. ADDITIONAL OPERATION Changing the Camera Angle(compatible with DVD discs) During disc playback, press Angle on the remote once, and the angel icon appears. If multiple camera angles are available, the Angle icon displays the current angle number and the number of angles available. For example: "Angle Icon: [* / *or [Off]"; 1 / 4 indicates ] that angle one is being displayed. [. . . ]