User manual LENCO DTVR-700

[. . . ] DTVRDTVR-700 7" Wide 16:9 TFT LCD Monitor Slot In Disc DVD/DivX Player Built-in DVB-T/ TV Tuner FM PLL RADIO USB and 3 in 1 Card Reader Full Remote Controller CONTENT 1. PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01 2. CAUTIONS ON USING THIS PLAYER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02 3. CHECKING ACCESSORIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03 4. [. . . ] 4) When the battery unit is hot, it may take longer than usual time for recharging or may sometimes be unable to be recharged. Wait for the battery unit to cool down before retrying recharging. 8. CONNECTING THE PLAYER TO OTHER COMPONENTS 8. 1connecting to AC-DC adapter 1) Please plug the AC-DC adapter to an AC power socket; 2) Connect the DC output of adapter to DC in of the main unit. Please use the adapter that is the standard accessory of the main unit. 8. 2 Connecting an earphone Connect the earphone plug securely to the earphone jack on the main unit. To listen to audio, use V+/V- or +/- (touch key) to adjust the volume to a comfortable level. Strong noise is produced when DTS discs are played. Note: Insert the earphones plug securely. 12 8. 3 connecting to USB storage 1) Please connect the USB storage to the USB terminal of the main unit 2) The main unit will read the contents that are available on the USB storage device automatically Note: 1)The USB terminal of the main unit support USB 1. 1 only. 2)The main unit will read the contents of a USB storage device when the main unit is set in USB mode. 8. 4 connecting to memory card (SD/MMC/MS) 1) Please insert the memory card into the memory socket of the main unit 2) The main unit will read the contents that are available on the memory card automatically Note: 1) Please insert the memory card in right direction, SD/MMC cards should be inserted upside down 2) The main unit will read the contents of a memory card when the main unit is set in Card mode. 13 8. 5 Connecting to a TV set Before connecting Turn off the power of the player and the devices to be connected. 8. 6 Connecting to a digital amplifier that is not Dolby Digital / DTS / MPEG compatible Output the digital signals from the player's digital output to a digital amplifier that is not Dolby /DTS/MPEG compatible. Note: 1) Carefully check the player's digital output settings before connecting the player to an amplifier which is not Dolby Digital / DTS / MPEG compatible. 14 8. 7 Connecting to active speaker systems Note: Please set the main unit to AV output mode. 8. 8 Connecting to a Audio/Video player system Note: Please set the main unit to AV input mode. 15 9. BASIC OPERATIONS 9. 1 Turning on/off the main unit 1) Turn power on (1) The main unit is in standby mode when the unit is powered (2) Press POWER (remote control unit or the main unit 1. 5 seconds) to turn on the unit when the unit is powered. 2) Turn power off Press POWER (remote control unit or the main unit 1. 5 seconds) to turn off the unit . 9. 2 Placing discs 1) Power on the player 2) Open the TFT cover 3) Place the disc 4) Close the TFT cover Note: 1) Please place the disc correctly 2) Do not use discs that are scratched 9. 3 Playing discs 1) Reading disc, DVD, VCD or CD will be shown in the TFT display. 2) The disc will be played automatically 3) Press PLAY to play the disc 9. 4 Removing discs 1) Press STOP to stop playback 2) Open the TFT cover 3) Take out the disc 4) Close the TFT cover 9. 5 Mode settings (Brightness/Contrast/Color/TFT display mode /PAL Plus(only for ATV mode)) Please press MODE (remote control or in the main unit) to select an item you want to adjust/change when the main unit is in play mode. 1) Press MODE, setting brightness; 2) Press MODE, setting color; 3) Press MODE, setting contrast; 4) Press MODE, setting LCD display mode; 5) Press MODE, In ATV mode, setting PAL Plus ON or OFF. 9. 6 Stopping the playing 1) Press STOP to pause the playing, the unit can memorize the play point 2) Press PLAY to continue play from the pausing point 3) Press STOP to stop the disc Note: The unit can not "continue play from the pausing point" for some discs 9. 7 Pausing the disc 1) Press PLAY/PAUSE to pause the playing during playback 2) Press PLAY/PAUSE to continue playback 16 9. 8 Scanning forward and backward 1) Press REV/FWD (the remote control) 1. 5 seconds to speed up the playing when playing in forward/backward direction 2) Change the playing speed to X2, X4, X8, X20 and normal by pressing the REV/FWD button on the remote control unit. 9. 9 Repeat playing the disc 1) A-B play mode (1) Press A-B, the TFT will show Repeat A(2) Press A-B again, the main unit will repeat the play from A to B. 2) Repeat playing the title, chapter or track (1) Press REPEAT to select the title, chapter or track when the unit is in play mode (2) DVD: title, chapter; VCD or CD: track. 9. 10 Searching the disc 1) Press GOTO 2) Use the cursor key and ENTER to select the proper playing item 3) Use the digits to select playing time, title, chapter or track 4) Press ENTER to confirm the playing item 5) Press GOTO to resume the play mode 9. 11 Zoom playing Press ZOOM every times, the picture will change to 2X, 3X, 4X, 1/2X, 1/3X, 1/4X and normal. 17 9. 12 Program playing The main unit may play the list according to the following program list: 1) Press PROGRAM, the menu will be shown in the LCD Hint: (1) T is for Title, C is for Chapter (DVD discs). (2) T for track (CD, VCD discs) NOTE: There is no title, chapter or track for some discs. See the picture. 3) Use the cursor key to move the cursor to the PLAY icon, and press ENTER to start to play the list 4) Use the cursor key to move the cursor to the CLEAR icon, and press ENTER to clear the play list. [. . . ] 12. 4. 1 TV Setting When you select TV Setting, the unit will show the following: You could use cursor Up/Down to select TV System, TV Type. 29 12. 4. 2 Language When you select Language, the unit will show the following: You could use cursor Up/Down to select OSD Language. 12. 4. 3 Parent Control When you select Parent Control, the unit will show the following: You could use cursor Up/Down to select change pin, channel lock. When you select change pin and press ENTER to confirm, the unit will show the following: Use the digits to enter the old pin(original password:0000), enter new pin (the password you want), confirm . [. . . ]