User manual LENCO DF-241

[. . . ] After the application software has been successfully installed, you could connect device to PC with the provided USB cable. NOTE: The software can not initialize with the unit if plugged in while running in automatic slide show mode. This Digital Photo Frame is a stand-alone device that is designed to transfer and store images from a PC and then display the images. [. . . ] Press down the left end of the rod, and grab the other end to remove the rod from the main unit. Replace the frame by inserting the two tabs on the main unit to the two holes at the top of the frame. Bring the main unit and frame together, then press at the bottom until it clicks in place. Screw in the rod to one of the two screw holes on the back of the main unit. IMPORTANT You must install the software to your computer before : connecting the device to your computer for the first time. Insert the CD-ROM and run the file Photo Viewer SETUP; follow the onscreen instructions. The application Photo Viewer will be installed on your computerand a shortcut to the application will appear on your desktop. After the software is installed, connect the device to the computer with the USB cable supplied. Follow the on-screen instructions and accept the installation screens that appear. After hardware installation is complete, launch the PhotoViewer application from the shortcut on your PC desktop. NOTE: If you are unable to launch the software or connect to your device, go to the Troubleshooting of this manual for more information. The internal battery of the device may be charged using the USB cable when connected to a powered USB port(such as USB port on your computer) or hub. Attention: You must connect the Photo Viewer to the PC before launching the software. Insert one end of the USB Cable into USB on your computer's USB port and the other end into the Photo Viewer. " appears on the Photo Viewer, press MODE to confirm, and "Download" appears, indicating the connection is complete, If no key is pressed during 1 minute, the Photo Frame will enter battery charging mode. If the photo is too big, a red box appears on the photo, and you can click the red box and mover around the box to crop the photo. [. . . ] When the Dialog box comes up, click the option that says "Yes, I have already connectecd the software". If a warning icon appears next to the Photo Viewer then double click the icon and select the option to "Reinstall the software". If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste. [. . . ]