User manual LENCO DC-5102

[. . . ] Note: Select the macro function for sharper pictures by sliding the macro button Page 3 of 32 in place when the subject is 15 ­ 40cm from the camera. While saving the photos into the camera, don't open the battery cover or ¡ ¡ Attention ¢ ¢ remove the batteries, or else, it will fail to save or damage will be caused to the images being saved. Attention The length of recording depends on the capacity of the memory card. 2. 4 Playing video You can play the photos and video through TFT screen, or by connecting the camera to the TV. [. . . ] 3. 9 Auto power off You can set the time to auto power off in the menu. £ 1. Turn on the camera , press the MENU button , and select the settings menu £ § 2. 3. 10 Language scroll to "Auto Power Off" window to select the time to auto power off£ Page 13 of 32 £ 1. Press the MENU button , and then select the settings menu £ Change to TV Output: scroll to "TV mode" , scroll to the required TV mode 5. 3. 11 Power The battery shows on the LCD screen: empty Factors affecting battery life ¡ ¨ ¨ low full the frequency and time in using the LCD the frequency and time in using the flash light ¨ number of photos taken ¨ temperature(the battery life shortens in low- temperature environment ) Do not use manganese battery; Page 14 of 32 ¡ Attention ¢ £ 4. Press UP/DOWN button scroll to the language window£ to select the required language 4. Downloading Turn the camera on, and then connect to the computer with a USB cable. Then you can download and copy pictures, files and other data from the camera to your computer or from the camera to the memory card. After finishing downloading or uploading, ensure to disconnect the camera from the computer in a safely removal way. PC camera function This camera can be used as a PC camera after the camera driver is installed into your computer. Page 15 of 32 ¦ ¢ ¢ ¢ ¢ ¢ While the camera is turned on, do not take out the battery or re-install it, or else, the settings and the function will be affected. The following factors will consume the battery : While turning on the LCD screen, LCD screen stays in replay mode, Connecting the camera to the computer 5. 1 How to install the camera driver 1. Put the accompanying CD into the CD-ROM; 2. The system will indicate when installation is finished Attention ¡ £ © £ 3. How to use PC camera ¡ if needed While installing the driver, ensure that the camera isn't connected to Page 16 of 32 £ 6. Connect the camera to the computer with USB cable £ 5 . Press the MENU button to return £ § 4. Press LEFT/RIGHT button § 3. Press UP/DOWN button scroll to the "USB Connection" window£ scroll to "PC-CAM" £ 2. Run the "AMCAP. EXE"; A window will turn up on the computer monitor screen, showing the images being taken. How to maintain the camera It is recommended always to maintain your camera and also the accessories. If LCD monitor or viewfinder surface is dirty, please use a lens brush or soft cloth to wipe the surface clean instead of touching the lens with your fingers. Do not use any solid object to hit the camera to avoid scratching the lens, LCD monitor or viewfinder surface. Do not keep the camera in a sunning or scorching environment for a long time. [. . . ] Note: Please confirm your camera has been turned off when you remove the SD card. 9. 3 Use as a PC Camera This camera can be used as a PC Camera, you can communicate with the long-distance customers via internet. Press the menu button and then press the direction buttons to highlight the icon of " "; 3. Press the UP or DOWN buttons to highlight the option of USB connection; 5. [. . . ]