User manual LENCO DC-3105 BROCHURE

[. . . ] Note: DC-3105 does not support audio function, therefore recorded AVI files Page 4 of 32 do not produce sound when played back on the camera or on TV. Viewing the photo You can view photos saved in the camera or the memory card through LCD screen. Press the menu button, then press OK to select the album mode; Press left/right button Press down/up button zoom is 4 times. to preview the item; to enlarge or dwindle the photo. The highest Viewing the video You can view the video saved in the camera or the memory card through the LCD. 1, Press the MENU button, then press OK to select the album mode; 2, Press LEFT/RIGHT button to select the item; Page 5 of 32 3, Press the up button to play the video, press down button to stop; 4. [. . . ] Press the MODE menu; § £ £ ¦ £ ¦ ¥ 1. Press the POWER button to turn the camera on 3. Press UP/DOWN button 4. Press LEFT/RIGHT button scroll to the "white balance" window£ to select the needed 5. Press LEFT/RIGHT button £ ¥ ¡ The size to be selected 1600X1200 2048X1536 2560X1920 , and scroll to the size window£ to change the menu of picture size 4. Press the MODE button to return to preview mode Page 10 of 32 3. 5 Digital zoom This camera is equipped with digital zoom function. Date and Time This camera has the clock function to record the date and time of shooting and recording. menu £ § ¡ Attention Digital zoom will affect the picture quality. The higher the zoom, the to adjust the focal range of camera while it 1. Turn on the camera, press the MENU button 2. Press UP/DOWN button window£ press OK to select; Page 11 of 32 and then change to the settings £ , scroll to the "Date & Time Setting" 4. 3. 7 The other settings 3. 8. USB (storage) & PC camera mode Storage mode ¡ ¦ £ You can also set the other functions in the menu PC--CAM mode: this camera can be used as a webcam. Turn camera on, press the MENU button, select the settings menu by pressing OK; 2. , scroll to USB Connection mode window£ , scroll to the required USB mode ¤ Changing the USB connection mode Page 12 of 32 NTSC or PAL can be selected. £ 1. 6. 2 For battery When the battery is low, please change new batteries of the same type according Page 17 of 32 to instructions on the batteries. Please take out the batteries if the camera is not to be used for a long time. Ensure that no leaking, corroded or expansive batteries are used in the camera. Attention: If rechargeable batteries are used, ensure to take them out from camera for recharging by charger if the battery level is low. 6. 3 Memory card In the following conditions, the memory card needs to be formatted: ¨ ¨ ¨ non-formatted card When the formatted card doesn't work in the camera normally, please re-format it again. If the same card is used in different cameras, it is recommended to format it for the best effect. Formatting will delete all the data, so please backup the data in the card before formatting. Attention: When the process is being done, do not open the cover or remove the batteries, or else damage may be caused to the memory card. SD card can be used in this camera Normal SD card (8MB-1GB) © © ¢ 3V 3. 3V card 8MB-1GB 5V SD card cannot be used in this camera. The camera may not distinguish non-standard cards and cards formatted in other cameras, so make sure to format the memory card before use. 6. 4 Safety To avoid the risk of electronic shock, do not disconnect or repair the camera by yourself. Once water or steam gets into the camera, stop using the camera at once and dry it completely Page 19 of 32 ¡ £ 5. Press the OK button to confirm £ § 4. [. . . ] Remarks: After the first time, the computer does not need to install driver again. Note: Before connecting the camera to the computer, please confirm the camera has turned off. Page 28 of 32 Download the photos: After installing the driver system, the camera becomes a Removable disk. Save the documents with "JPEG" or "AVI" file formats to the computer's hard disk along your appointed path. 9. 2. 3 Other ways of downloading the camera's images If you don't want to download the image files through the camera's USB port, you can download it through a card reader. [. . . ]