User manual LA CROSSE TECHNOLOGY WS-7095U INSTRUCTION MANUAL

[. . . ] WS-7095U Wireless 433 MHz 24" Wall Hanging Wireless Weather Center Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents/Additional Equipment: Quick Set-Up Guide: Detailed Set-Up Guide Battery Installation: LCD Screens: Program Mode Function Buttons: LCD Contrast: 12/24-hour Time Display: Time Setting: Time Zone Setting: Date Setting: Date Display: Selecting °F or °C and Inches or Millimeters: Setting Forecast Sensitivity: Displaying Relative/Absolute hPa/inHg: Manually Setting Relative Air Pressure: Setting Bar Graph Display: Features & Operations Moon Phase: Minimum & Maximum Records (Indoor, Outdoor, Resetting): Weather Forecast and Weather Icons: Bar Graph Histories (Air Pressure and Rainfall): Rainfall (Quantity & Resetting): Manual setting of Rain Multiplicator: Hard Reset of EEPROM Weather Center Memory: Adding Transmitters: Mounting: Maintenance and Care: Troubleshooting: Specifications: Warranty Information: Page 3 3 4 5 6 6 6 6-7 7 7 7 7-8 8 8-9 9 9 10-11 11-12 12-14 14-16 16-17 17 17-18 18-19 19-22 23 23 24-25 26 2 INVENTORY OF CONTENTS 1. WS-7095U--24" Wall Hanging TX4U--Remote Thermo-Hygro mounting adhesive 3. TX5U-- includes a two warranty ADDITIONAL EQUIPMENT (not included) 1. Four wall-mounting screws. Figure 1. Figure 2 Wireless Weather Center (Figure 1). [. . . ] A "sad-face" will humidity are outside the mentioned "DRY" will appear to the right of the 54% the word "wet" will appear to the IV. AIR PRESSURE HISTORY The air pressure is indicated by the appearance of the word "PRESSURE" at the top of the LCD 5 screen. The bar graph (in LCD 5) shows in hPa (Hekto Pascal) the recorded air pressure over the past 24-hours. The horizontal axis shows the hours at increments of 24-hours, 18-hours, 12-hours, 6-hours, 3-hours, 2-hours, 1-hour, and 0-hours. The vertical axis is set by hPa: the "0" on this axis represents the current hPa, and + or ­ 1, 3, 5, or 7 shows (in hPa) how high or low the past air pressure was as compared to the current one. The "0" on the vertical axis indicates the air pressure value seen in LCD 4. The "0" on the horizontal axis indicates that the "0" on the vertical axis is the present air pressure. Each brick on the bar graph represents a value of 0. 03 hPa, and each brick also has a corresponding value on the verticle axis. Multiply the two values to find past air pressure (note the + or ­ sign of values on the verticle axis); i. e. 0. 03 hPa x 3 = 0. 09 hPa, now add this value to the air pressure (in LCD 4) to evaluate what past air pressures have been. Air pressure trends can be determined by simply glancing at the bar graph. If the bars are rising (higher on the right than the left) then the air pressure has a rising trend, and the weather should improve. If the bars are dropping (lower on the right than the left) then the air pressure has a falling trend, and the weather should worsen. lower portion of LCD 3 as either a humidity, or as a "sad-face" to the right display a "happy-face" when the (20°C and 25. 9°C), and the humidity is be displayed when the temperature and ranges. If the humidity is above right of the "sad-face" icon. Comfort Level Indicator Position "0" on both the vertical and horizontal indicate present air pressure. The top bar corresponds with "-1" on the vertical axis, multiply 0. 03 x ­1, we get ­0. 03 hPa. Add ­0. 03 to current air pressure readings to attain the air pressure 1-hour ago. A decline in air pressure is shown between the "-3" and "-1" hours. RAINFALL HISTORY The bar graph will also display the rainfall history; this mode is indicated by the appearance of the word "RAIN" at the top of the LCD 5 screen. The horizontal axis measures the past time periods, with "0" representing the current day, week, or month and "7" representing the oldest information (7 days ago, 7 weeks ago, or 7 months ago). The vertical axis measures the rainfall in either preferred increments of inches or millimeters. The normal (default) measurement scale is: in inches {0, 0. 1, 0. 3, 0. 5, 1, 2, 3, 5, 10}; in millimeters {0, 1, 3, 5, 10, 30, 50, 100}. [. . . ] Immediately remove all low powered batteries to avoid leakage and damage. TROUBLESHOOTING Problem: Solution: Problem: Solution: The LCD is faint. 1) Remove all batteries, reinsert into transmitter first, then Weather Center. 4) No other interfering sources on a 433MHz frequency are being used (such as computer monitors, TV sets, headphones, or speakers) in the vicinity. [. . . ]