User manual LA CROSSE TECHNOLOGY WS-6002U-A INSTRUCTION MANUAL

[. . . ] 3) If there is no WWVB reception, manually set the time and date (instructions in the Program Mode). 5) Mount the WS-6002U in a suitable location, where WWVB signals can be received. 4 DETAILED SET-UP GUIDE I) BATTERY INSTALLATION Note: To avoid start-up problems make sure that the batteries do not spring free. Battery Compartment SET Battery Cover A) ATOMIC CLOCK 1) Remove the battery cover, located on the backside of the function buttons. Note: After the batteries have been installed all the LCD's (Liquid Crystal Display) will briefly light up. Then the indoor temperature, the date as "1/ 1" and the weekday as "MON" will be displayed. [. . . ] 2) Press and release the "+" button to toggle through and to select the desired language. There are 3 languages to select from: US F E English French Spanish 3) Press and release the "SET" button to confirm the language setting, and to advance to manually set the time. V) TIME SETTING Note: When the WWVB signal is found, that time will over-ride the manually set time. 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 3 more times, until the hour "12:00" flashes in the time LCD. Note: when setting the hour, "PM" will appear to the left of the hour display, if it is AM nothing will be displayed. 3) Press and release the "SET" button to confirm the hour setting, and to shift to select the minutes. 5) Press and release the "SET" button to confirm the time setting, and to advance to manually set the calendar. 8 VI) CALENDAR SETTING Note: When the WWVB signal is found, that date will over-ride the manually set date. 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 5 more times, until the default year "00" flashes in the date LCD. 3) Press and release the "SET" button to confirm the year, and to set the month. Press and release the "+" button to select the appropriate month. 5) Press and release the "SET" button to confirm the month, and to set the date. Press and release the "+" button to select the appropriate date. 7) Press and release the "SET" button to confirm the date, and to set the weekday. 8) The default weekday "MON" (depends on selected language) will flash. Press and release the "+" button to select the appropriate weekday. 9) Press and release the "SET" button to confirm the calendar settings, and to advance to select either 12 or 24-hour time display. VII) 12/24-HOUR SETTING 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 9 more times, until the "12" hour time display flashes in the time LCD. 2) Press and release the "+" button to toggle between 12 and 24 hour time. 3) Press and release the "SET" button to confirm the 12/24-hour time display, and to advance to select either °F or °C. 9 VIII) SELECTING °F OR °C 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press the "SET" button 10 more times, until the default "°F" flashes in the time LCD. 2) Press and release the "+" button to toggle between °F and °C. 3) Press and release the "SET" button to confirm the °F or °C selection, and exit the Program Mode. [. . . ] Note: For any questions not answered, contact La Crosse Technology with the contact information found at the end of this instructional manual. SPECIFICATIONS Temperature: Measuring 32°F to 122°F with 0. 2°F resolution range: (0°C to 50°C with 0. 1°C resolution) Outside "OFL" will be displayed range: Checking Every 10 seconds intervals: Power source: Battery type: 2 x AA, IEC LR6, 1. 5V (Alkaline) Battery life: Approximately 12 months 8. 3 x 1. 2 x 8. 4 in Dimensions (L x W x H): (211. 8 x 30. 5 x 214. 4mm) 13 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances. LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT. [. . . ]