User manual KENWOOD KSC-SW11

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KENWOOD KSC-SW11. We hope that this KENWOOD KSC-SW11 user guide will be useful to you.


KENWOOD KSC-SW11 : Download the complete user guide (868 Ko)

Manual abstract: user guide KENWOOD KSC-SW11

Detailed instructions for use are in the User's Guide.

[. . . ] – Remote control operation • Do not use the product for purposes other than on-board mounting. Declaration of Conformity with regard to the EMC Directive 2004/108/EC Manufacturer: JVCKENWOOD Corporation 3-12, Moriyacho, Kanagawa-ku, Yokohamashi, Kanagawa, 221-0022, Japan EU Representative’s: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands CAUTION • Installation and wiring of the product requires expert skill and experience. To ensure safety, be sure to have your dealer or specialist perform the installation and wiring. • Do not install the speaker in a spot exposed to direct sunlight or excessive heat or humidity. • Do not install the speakers in locations which may be subject to water or moisture. [. . . ] Front or rear speaker Center unit Left Right Caution: Do not distribute the cords in the paths where they may be caught by a vehicle part or damaged. Otherwise, an electric shock or a fire due to short-circuiting may result. Gray/Black SP. R INPUT Gray White/ Black SP. L INPUT White KSC-SW11 Fuse 10A 2 10-pin connector cord ENGLISH If there is no power control terminal in the center unit, connect the blue/ white wire to the accessor y line (ignition key switch ACC position line). Blue/White Car fuse box Do not bend the vinyl-coated section of the speaker cord. Otherwise, malfunction may result. LINE IN 3 Speaker cord Ignition key switch Car fuse box (Main fuse) ※ If buzzing noise is heard from the speakers when the engine is running, attach a line noise filter (commercially available) to the power lead. Yellow Black Yellow GND ※ Battery Caution: Connect the black lead wire ground terminal directly with a screw to an unpainted metal part of the vehicle. Turning the power ON without connecting this terminal is linked to damage of the stereo system. Also, painted metal panels etc. , are not grounded and will not function correctly. Be careful. 4 English B61-1376_1_EN_00_KSC-SW11. indd 4 12. 11. 30 10:32:58 AM RCA input connection p Connect the subwoofer to the subwoofer output (non-fader output) or the RCA jacks for the front output of the center unit. Notes: • Read the instruction manuals for the connected components such as the center unit as well as this instruction manual. • Please purchase an RCA cord that is commercially available separately. • When the center unit incorporates a DSP, connect the subwoofer to the subwoofer output (non-fader output) or to the RCA jacks for the front output. Do not connect to the RCA jacks for the rear output, as the low-frequency reproduction effect may be attenuated due to the DSP effect. ■ Examples The following shows a typical connection for effective car stereo enjoyment. Connect your system by referring to the example. Caution: Do not distribute the cords in the paths where they may be caught by a vehicle part or damaged. Otherwise, an electric shock or a fire due to short-circuiting may result. Fuse 10A Center unit (SUB WOOFER OUT, Non-fader output) KSC-SW11 If there is no power control terminal in the center unit, connect the blue/ white wire to the accessor y line (ignition key switch ACC position line). Blue/White Car fuse box 2 10-pin connector cord RCA cord (Commercially available parts) LINE IN Ignition key switch Car fuse box (Main fuse) ※ If buzzing noise is heard from the speakers when the engine is running, attach a line noise filter (commercially available) to the power lead. Yellow Black Yellow ENGLISH GND ※ Battery Caution: Connect the black lead wire ground terminal directly with a screw to an unpainted metal part of the vehicle. Turning the power ON without connecting this terminal is linked to damage of the stereo system. Also, painted metal panels etc. , are not grounded and will not function correctly. Be careful. Center unit RCA cord (Commercially available parts) KSC-SW11 When the center unit output is a single RCA jack, use an RCA cord that converts the output into the two RCA jacks as shown above. The subwoofer output will be halved if the conversion cord is not used. English 5 B61-1376_1_EN_00_KSC-SW11. indd 5 12. 11. 30 10:32:59 AM Installation Before fixing the speaker in its position, be sure to check the sound while it is connected preliminary. Caution: • When making a hole under a seat, inside the trunk, or somewhere else in the vehicle, check that there is nothing hazardous on the opposite side such as a gasoline tank, brake pipe; or wiring harness, and be careful not to cause scratches or other damage. • Install in a location that does not come in the way of driving, getting in or out of the vehicle and movement inside the vehicle compartment. • Fix the product firmly so that it will not be moved by vibrations or impacts during driving. ■ Fixing the cord in place 8 Machine screw x 2 5 Fixture B Connect the 10-pin connector cord 2 and remote control 1 to the speaker unit. Fix the cords to the speaker unit with fixture B 5 and fix in place with the machine screws 8. Fix the cord so that it will not protrude from the side of the speaker unit. [. . . ] • Insert the connector all the way in. Sound quality is bad (sound is distorted). ENGLISH Remote control does not work. The illuminations on the remote control unit do not light. Specifications p The following ratings and design are subject to change without notice. Maximum output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 W Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Hz - 150 Hz Cut-off frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KENWOOD KSC-SW11




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KENWOOD KSC-SW11 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.