User manual KENWOOD KRC-291

[. . . ] · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. · Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid crystal fluid may be dangerous to your health or even fatal. [. . . ] Making a Forward Track Search: Press the ¢ button to display the desired track number. Press once to fast forward to the next track, twice to fast forward to the track after that, and so forth. NOTE (For disc changers) You cannot make a forward track search when listening to the last track on a disc. · When one disc has finished playing its last track, the next disc in the changer starts playing. When the last disc in the changer has finished, the player returns to the first disc and starts playing it. · Disc #10 is displayed as "0". Fast Forwarding and Reversing Disc Play Fast Forwarding Disc Play: Hold down on the ¢ button. Release your finger to play the disc at the point. NOTE Disc Search (Function of disc changers) Search forwards or backwards through the discs in a disc changer until you reach the one that you want to listen to. Making a Reverse Disc Search: Press the DISC­ button to display the desired disc number. Each time the button is pressed, the displayed disc number decreases by one. You cannot use reverse play between tracks depending on the model being connected. Instead, the reverse play function is -- 16 -- Play starts at the beginning of the displayed disc. Making a Forward Disc Search: Press the DISC+ button to display the desired disc number. Each time the button is pressed, the displayed disc number increases by one. Play starts at the beginning of the displayed disc. NOTE "LOAD" is displayed when discs are being exchanged on the disc changer. Starting the Track Scan: Press the SCAN button. · Pressing the reset button does not erase the disc names stored in a disc changer. -- 19 -- External disc control features English Magazine Random Play (Function of disc changers) Play the tracks on all the discs in the disc changer in random order. 1 Press the M. RDM button to switch the magazine random play function on and off. "MRDM ON" is displayed when magazine random play is turned on. The display of the disc and track numbers change continuously as the next track is being selected. The selected disc/track number blinks in the display as it is being played. Menu settings AM 4 ¢ FM SCRL T. CALL 2 To change the track being heard, press the ¢ button. Another disc/track is selected and played. NOTE #1 ­ 6 MENU · Magazine random play is cancelled when you eject the disc. · The time needed for random selection depends on the number of discs loaded in the disc magazine. AUTO indicator RDS indicator Menu display -- 20 -- Menu System You can set the defaults for additional functions in the menu mode. Make a setting for each function, referring to the following operations. Touch Sensor Tone This function produces a beep sound that accompanies button operation. It can be switched on or off. 1 Enter the menu mode Hold down the MENU button for one second or more. The function that you can adjust is indicated with the current settings displayed. Display and setting: "BEEP ON" : Beep setting is on. (Default setting) "BEEP OFF" : Beep setting is off. NOTE The beep sound is not output from the preout jacks. 2 Selecting function to set Press the FM button to search through the functions until you see the one you want to adjust in the display. Function items change in the order of features that follow in the menu system. [. . . ] Can't remove tape. The TEL mute cable is not connected properly. The TEL mute cable is touching a metal part of the car. The cause is that more than 10 minutes has elapsed since the vehicle switch was turned OFF. The tape can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button. Refer to the "System Q" page and switch it to a function other than Scan mode. [. . . ]