User manual KENWOOD KDC-MP243

[. . . ] Note that any KENWOOD disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Setting the "O-N" Switch to the "N" position for the applicable KENWOOD disc changers/ CD players. The functions that can be used and the information that can be displayed will differ depending on the models being connected. · You can damage both your unit and the CD changer if you connect them incorrectly. Attach the panel while you are on the vehicle The panel lock arm will be appeared when the panel is removed. Therefore, the panel must be attached during the driving. 2CAUTION To prevent damage to the machine, take the following precautions: · Make sure to ground the unit to a negative 12V DC power supply. [. . . ] · The advancement of the play mode information can be selected by [AM] and [FM] keys. 3 Decide the folder to play Press the Control knob. The Folder Select mode releases, and the Audio file in the folder being displayed is played. Canceling the Folder Select mode Press the [F. SEL] button. 22 | English Function of the KDC-W6531 Function of the ACDrive disc Disc Naming (DNPS) Attaching a title to a CD. Letter Seek The song, in which you want to play, can be searched by selecting the initial of Genre name, Artist name, or Album name. 1 Play the disc you want to attach a name to · A title can't be attached to MD or Audio file media. 1 Enter the Letter Seek mode Press the [S. MODE] button for at least 1 second. · It doesn't function when <Disc Random Play> (page 21) is ON. · This function is available only when the Play mode is set Genre, Artist, or Album. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select Name set mode Push the Control knob to [FM] or [AM]. Select the "NAME SET" display. 4 Enter Name set mode Press the Control knob for at least 1 second. Canceling the Letter Seek Press the [S. MODE] button. 5 Move the cursor to the enter character position Push the Control knob to [4] or [¢]. 2 Start the Letter Seek Push the Control knob to [4] or [¢]. The initial of Genre name, Artist name, or Album name is displayed and read out by the order. · The announcement of the initial can be canceled by <Voice Index> (page29). · When the Control knob is pushed to the reverse of [4] or [¢] while Letter Seek, the initial is displayed and read by the reversed order. · When the Letter Seek is started, it cannot be cancelled. 6 Select the characters Push the Control knob to [FM] or [AM]. 7 Repeat steps 5 through 6 and enter the name. 8 Exit Menu mode Press the [MENU] button. · When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes. · Media that you can attach a name to - Internal CD player: 10 discs. - External CD changer/ player: Varies according to the CD changer/ player. After the input prohibited time lapses, "CODE" is displayed, and input can be done. 4 Exit Clock adjustment mode Press the [MENU] button. English | 25 Menu system In Standby mode In Standby mode Synchronize Clock Synchronizing the RDS station time data and this unit's clock. Display "SYNC ON" "SYNC OFF" Setting Synchronizes the time. Adjust the time manually. Switching preout Switching the preout between the rear and subwoofer. (In subwoofer it outputs without effect from the fader control. ) Display "SWPRE R" "SWPRE SW" Setting Rear preout. Subwoofer preout. · It takes 3 to 4 minutes to synchronize the clock. In Standby mode In Standby mode Built-in Amp Setting Built-in amplifier is controlled. Display "AMP ON" "AMP OFF" Setting The built-in amplifier activates. The built-in amplifier deactivates. DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. LED OFF. Other than Standby mode In Standby mode Selectable Illumination Selecting the button illumination color as green or red. Display "KEY RED" "KEY GRN" Setting The illumination color is red. (Bass Management System) Adjust the bass boost level of the external amplifier using the main unit. Display "BMS FLT" "BMS +6" "BMS +12" "BMS +18" Setting Bass boost level is flat. [. . . ] The TEL mute function turns ON even though the TEL mute wire is not connected. Even if Loudness is turned ON, high-pitched tone isn't compensated for. High-pitched tone isn't compensated for when in Tuner source. No sound can be heard, or the volume is low. Turn up the Volume offset, referring to the section on <Audio Control> (page 10). [. . . ]