User manual KENWOOD DPX-MP4090

[. . . ] Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. [. . . ] Each time you press the knob, the audio pauses or plays. ⁄ • Disc 10 is displayed as "0". • The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected. 16 | English B64-3609-00_English_r5. indd Sec1:16 06. 12. 6 3:00:42 PM Fast Forwarding and Reversing Fast Forwarding Hold down toward [¢] with the Control knob. Release to resume the playback. Function of disc changers with remote control Direct Disc Search Doing Disc Search by entering the disc number. 1 Enter the disc number Press the number buttons on the remote control. ⁄ • There is no sound while the Audio file is being searched. • The accurate play time is not displayed during fast forwarding or reversing of the Audio file. • You cannot fast Forwarding and Reversing while AAC file is being played. 2 Do Disc Search Press the [+] or [–] button. Cancelling Direct Disc Search Press the [38] button. ⁄ • Input "0" to select disc 10. Track/File Search Searching for a music on the disc or in the Audio file folder. Push the Control knob towards [4] or [¢]. Track/File/Disc/Folder Repeat Replaying the music, disc in the Disc changer or Audio file folder you are listening to. Each time you press the button, the Repeat Play alternates between the modes shown in the tables below. Function of disc changer/ Audio file Disc Search/Folder Search Selecting the disc set in the Disc changer or the folder recorded on the Audio file media. Push the Control knob towards up or down. In CD & External disc source Repeat play Track Repeat Disc Repeat (In Disc Changer) OFF Display "TRAC REP" "Disc REP" — In Audio file source Function of remote control Direct Music Search Doing Music Search by entering the music number. Repeat play File Repeat Folder Repeat OFF Display "File REP" "FOLD REP" — 1 Enter the music number Press the number buttons on the remote control. ⁄ • You can select Direct music Search up to 999. 2 Do music Search Press the [4] or [¢] button. Cancelling Direct Music Search Press the [38] button. English | 17 B64-3609-00_English_r5. indd Sec1:17 06. 12. 6 3:00:43 PM CD/Audio file/External disc control features Scan Play Playing the first part of each music on the disc or Audio file folder you are listening to and searching for the music you want to hear. Function of Audio file Folder Select Quickly selecting the folder you want to hear. 1 Enter Folder Select mode Press the [F. SEL] button. During Select mode the folder information is displayed as shown below. 1 Start Scan Play Press the [SCAN] button. "TRAC SCN" (CD)/ "File SCN" (Audio file) is displayed. 2 Release it when the music you want to listen to is played Press the [SCAN] button. Random Play Play all the music on the disc or Audio file folder in random order. When the Random mode is ON, "Disc RDM" (CD)/ "FOLD RDM" (Audio file) is displayed. Folder name display Displays the current folder name. 2 Select the folder level Push the Control knob towards up or down. When "ENTER" is displayed, "CODE" is also displayed. 4 Select the digits to enter Push the Control knob towards right or left. 5 Select the Security Code numbers Push the Control knob towards up or down. 3 Select the digits to enter Push the Control knob towards right or left. 6 Repeat steps 4 and 5, and complete the Security Code. 4 Select the Security Code numbers Push the Control knob towards up or down. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is also displayed. 5 Repeat steps 3 and 4, and complete the Security Code. 6 Press the Control knob for at least 3 seconds. "CLEAR" is displayed. The Security Code function deactivates. 8 Do the step 4 through 7 operation, and reenter the Security Code. The Security Code function activates. ⁄ • If a wrong security code is entered, "ERROR" is displayed. Enter a correct security code. ⁄ • If you enter the wrong Code in steps 4 through 6, repeat from step 4. In Standby mode Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Now, you can use the unit. English | 21 B64-3609-00_English_r5. indd Sec1:21 06. 12. 6 3:00:45 PM Menu system In Standby mode In Standby mode Contrast Adjustment Adjusting the display contrast. Display and Setting "CONT 1" "CONT 6" (Original setting) … … Opening Demonstration Setting the Demonstration when Power is turned ON. Display "Open ON" "Open OFF" Setting Demonstration is carried out when Power is turned ON. Demonstration is not carried out when Power is turned ON. "CONT 11" In Standby mode In Standby mode Built-in Amp Setting Controlling the built-in amplifier. Display "AMP ON" "AMP OFF" Setting The built-in amplifier activates. [. . . ] Before calling service, first check the following table for possible problems. General ! ? The Touch Sensor Tone doesn’t sound. ☞ The Touch Sensor Tone can’t be output from the preout jack. Tuner source ? ! Radio reception is poor. ☞ Connect the wire correctly, referring to the section on <Connecting Wires to Terminals>. Disc source !! ? The specified disc does not play, but another one plays instead. [. . . ]