User manual KENWOOD DDX319

[. . . ] Model DDX771/DDX491HD/DDX471HD/DDX371/DDX310BT/DDX319/DDX271/DDX2071 Serial number US Residents Only Register Online Register your Kenwood product at www. 31 V WARNINGS: (To prevent accidents and damage) • DO NOT install any unit or wire any cable in a location where; – it may obstruct the steering wheel and gearshift lever operations. If you need to operate the unit while driving, be sure to look around carefully. For DDX319/DDX2071: The marking of products using lasers INITIAL SETTINGS . [. . . ] Notifying SMS reception If the mobile phone is compatible with SMS (Short Message Service), the unit tells you a message has been received. (Page 39) • To read a received message, operate the mobile phone after stopping the car in a safe place. € For some mobile phones, the notification message may not be shown even if the SMS function is supported. On the <Top Menu> screen: • You can adjust the volume level between –20 to +8 (initial: 0). € This adjustment does not affect the volume level of the other sources. 1 2 3 4 Switching between handsfree mode and phone mode While talking. 1 2 3 4 From the phone book/call lists Direct number entry Voice dialing Preset list • To preset, see page 37. Each time you press the button, the talking method g is switched ( : handsfree mode / : phone mode). Indb 35 2013/11/01 16:10 BLUETOOTH From the phone book/call lists 1 • To use the A to Z search on phone book: When the <Phonebook> screen is displayed, you can search by initial. 1 • To display the details of an entry: When the <Phonebook> is displayed, you can display the details of an entry and select a phone number if several phone numbers are registered. [Outgoing] [Incoming] [Missed] [Phonebook] From the dialed call list From the received call list From the missed call list From the phone book • To copy the phone book, see page 37. Indications and buttons on the source control screen 12 3 * Available only for the devices compatible with AVRCP 1. € The operation buttons, indications and information displayed on the screen differ depending on the connected device. Playback information 1 Playback status (I: play/W: pause)* 2 Playing time* 3 Tag data (current track title/artist name/album title)* • Pressing [<] scrolls the text if not all of the text is shown. Indb 39 2013/11/01 16:10 SETTINGS Sound adjustment Using the sound equalization • The adjustment is memorized for each source until you adjust the sound again. If the source is a disc, the adjustment is stored for each of the following categories. € DVD/VCD – CD – DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC • You cannot adjust the sound when the unit is in standby. Selecting a preset sound mode Storing your own adjustment—Customizing preset sound mode Storing your own adjustment—Adjusting the sound precisely 1 Select a sound mode. 3 Select the band (1), adjust the level(2), then adjust the subwoofer level* (3). On the <Top Menu> screen: <Flat> The adjustments are stored and <User> is activated. <Q Factor> <Bass EXT> <SW Level> Adjusts the width of the frequency. € You can also display the <Tone> screen by pressing AUD (for DDX771/DDX271/DDX2071) or by pressing and holding the Volume/ATT/ AUD knob (for DDX491HD/DDX471HD/DDX371/ DDX310BT/DDX319) on the monitor panel. [. . . ] This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles). Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e. [. . . ]