User manual KAZ V934

[. . . ] The VICKS® Baby Digital Thermometer (V934) is designed specifically for measuring rectal temperatures of babies. IMPORTANT SAFETY INFORMATION High, prolonged fever requires medical attention especially for young children. If you have any questions or comments about the VICKS® Baby Digital Thermometer, call our toll-free Consumer Service Line: 1-800-477-0457. TEMPERATURE READINGS Temperature readings vary from person to person. Although there is no one "normal" temperature reading, a temperature, taken rectally, ranging between 98-100. 4°F is considered normal. [. . . ] Gently insert the tip of the thermometer NO MORE THAN 1/2 inch into the rectum. When the peak temperature is reached (usually 10 seconds) 10 beep signals will sound and the "°F" sign will stop flashing and the display light will come on. The temperature is now ready to read and will not change when the thermometer is removed. The display light will come on automatically to illuminate the last reading, then unit will power off. If you forget to turn it off, the thermometer will automatically turn off after approximately 9 minutes. Reminder: Wash the thermometer as recommended before placing it back in the storage case. Place the thermometer under the arm so the tip is touching the skin and position the arm next to the body. With a young child, it is sometimes helpful to hug the child to keep their arm next to their body. This helps hold the thermometer steady and ensures that the room air does not affect the reading. When the peak temperature is reached (usually 60 seconds) 10 beep signals Fig. 3 will sound and the "°F" sign will stop flashing and the display light will come on. The temperature is now ready to read and will not change when the thermometer is removed. If you forget to turn it off, the thermometer will automatically turn off after approximately 9 minutes. Wash the thermometer as recommended. AUTOMATIC NIGHT GLOW DISPLAY The night glow display works automatically as you turn your Vicks thermometer on or off. When turned on, the display will glow for 5 seconds to illuminate the last temperature taken and the ready display. When you turn off the thermometer, the display will glow again, illuminating the temperature reading for 4 seconds. TO RECALL THE LAST TEMPERATURE When the thermometer is turned on, the last measured temperature will be shown on the LCD display with the letter "M" shown under the degree sign for approximately 2 seconds. CLEANING INSTRUCTIONS Clean the sensor area of the thermometer only by washing with soap and warm water or rubbing alcohol (70% isopropyl alcohol). [. . . ] Following directions carefully will ensure years of dependable operation. If for any reason (other than misuse or normal battery replacement) you are dissatisfied with your VICKS® Baby Digital Thermometer, we will repair or replace it, at our option, free during your lifetime. If the thermometer does not function properly, first check the battery. [. . . ]