User manual KAZ V911G

[. . . ] If you have any questions or comments about the VICKS® SpeedReadTM Digital Thermometer, call our toll-free Consumer Service Line: 1-800-477-0457. · · · TEMPERATURE READINGS Temperature readings vary from person to person. Although there is no one "normal" temperature reading, a temperature, taken orally, ranging between 97°F and 100°F is considered normal. A rectal temperature is generally 1° higher and an underarm (axillary) temperature will be 1° lower. The best method to determine your own normal temperature is to use the thermometer when you are feeling well. [. . . ] 4 UNDER-THE-ARM (AXILLARY) USE This method is used for babies and young children. Place the probe tip under the arm so the tip is touching the skin and position your arm next to your body (Fig. With a young child, it is sometimes helpful to hug the child to keep their arm next to their body. When the peak temperature is reached (usually 11 seconds but sometimes longer for this method), 10 beep signals will sound and the "°F" sign will stop flashing. The temperature is now ready to read and will not change when the thermometer is removed. Note: This method produces a temperature 1° lower than a temperature taken orally. If you forget to turn it off, the thermometer will automatically turn off after approximately 10 minutes. Wash the thermometer as recommended. RECTAL USE Commonly used for babies, young children, or when it is difficult to take an oral or underarm temperature. Cover the thermometer's tip with a probe cover and lubricate with a water-soluble jelly for easier insertion. Read the label of the lubricant to be sure you are using the right kind. If the patient is an infant, the proper position for a baby is to lay on its stomach with legs hanging down, either across your knees or at the edge of a bed or changing table. This positions the infant's rectum for safe and easy insertion of the thermometer. Gently insert the tip of the thermometer NO MORE THAN 1/2 inch into the rectum. When the peak temperature is reached (usually 10 seconds) 10 beep signals will sound and the "°F" sign will stop flashing. The temperature is now ready to read and will not change when the thermometer is removed. NOTE: This method produces a temperature 1° higher than a temperature taken orally. If you forget to turn it off, the thermometer will automatically turn off after approximately 10 minutes. Dispose of used probe cover and wash the thermometer as recommended. TO RECALL THE LAST TEMPERATURE When the thermometer is turned on, continue to hold the button down approximately 2 seconds. The last measured temperature will be shown in the LCD display with the letter "M" shown under the degree sign for approximately 3 seconds, then unit will shut off. CLEANING INSTRUCTIONS · · · · Clean the thermometer by washing with soap and warm water or rubbing alcohol (70% isopropyl alcohol). This will cause the thermometer to no longer function and will void the warranty. [. . . ] Following directions carefully will ensure years of dependable operation. If for any reason (other than misuse or normal battery replacement) you are dissatisfied with your VICKS® SpeedReadTM Digital Thermometer, we will repair or replace it, at our option, free during your lifetime. If the thermometer does not function properly, first check the battery. If repair is necessary call our Consumer Relations Department at 1-800-477-0457 or write to Kaz, Inc. , Consumer Relations Department, 250 Turnpike Rd. , Southborough, MA 01772, explaining just how the thermometer is improperly working. [. . . ]