User manual JVC KD-X230

[. . . ] Indd 1 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 14/8/2015 11:59:36 AM Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. [. . . ] € Select “OTHERS” if the first character is other than A to Z, 0 to 9. € • • • To return to the previous setting item, press . Change the playback speed of the Audiobook While listening to the iPod and [HEAD MODE] is selected. 5× SPEED / 1× SPEED / 2× SPEED: Select the desired playback speed of the Audiobooks sound file in your iPod/iPhone. ) FLAT (Default) / HARD ROCK / HIP HOP / JAZZ / POP / R&B / TALK / USER / VOCAL BOOST / BASS BOOST / CLASSICAL / DANCE Adjust your own sound settings. Preset equalizer: FLAT (default), HARD ROCK, HIP HOP, JAZZ, POP, R&B, TALK, USER, VOCAL BOOST, BASS BOOST, CLASSICAL, DANCE EASY EQ PRO EQ Store your own sound settings to enter EASY EQ setting. 1 Press and hold 2 Turn the volume knob to select an item, then press the knob. Refer to [EASY EQ] for setting and the result is stored to [USER]. 1 Press and hold 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. LOUD 01 / 02: Boosts low or high frequencies to produce a well-balanced sound at low volume. W LEVEL *4 SPK-OUT *5 PRE-OUT *6 00 to +06 (+03): Adjusts the output level of the subwoofer connected via speaker lead. (  15) –08 to +08 (00): Adjusts the output level of the subwoofer connected to the lineout terminals (REAR/SW) through an external amplifier. Does not work if [BT ADAPTER] is selected for [AUX] in [SRC SELECT]. ; LOW 55HZ / MID 85HZ / HIGH 120HZ: Audio signals with frequencies lower than 55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer. Speaker output settings Select the output setting for the speakers [SPK/PRE OUT], base on the speaker connection method. W PHASE *4 REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [SUB. €15 — +06 (00): Preset the initial volume level of each source (compared to the FM volume level). (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers. About USB devices • This unit can play MP3/WMA/WAV/FLAC files stored on a USB mass storage class device. € Connecting a cable whose total length is longer than 5 m may result in abnormal playback. [. . . ] € If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key. € After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. € If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old fuse with one that has the same rating. Hook on the top side Orientate the trim plate as illustrated before fitting. [. . . ]