User manual JRC JSB-196GM BROCHURE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual JRC JSB-196GM. We hope that this JRC JSB-196GM user guide will be useful to you.


JRC JSB-196GM BROCHURE: Download the complete user guide (1361 Ko)

Manual abstract: user guide JRC JSB-196GMBROCHURE

Detailed instructions for use are in the User's Guide.

[. . . ] 150W MF/HF RADIOTELEPHONE JSB-196GM Simple installation on small ship High expandability Easy operation Digital signal processing (DSP) The JSB-196GM MF/HF Radiotelephone is a new generation of economical marine transceiver with high functionality designed to conform to the GMDSS A2 area requirements. [. . . ] High expandability The JSB-196GM can provide the HF E-mail communication capability by connecting a dedicated modem and a general-purpose personal computer. Easy operation The JSB-196GM is designed for user-friendly operation using a single large control dial for frequency channel selection, mode setting and high/low transmit power switching. The NCT-196 integrates the DSC modem and the watchkeeping receiver in it, enabling operations to fully meet the GMDSS requirements. Digital signal processing (DSP) The JSB-196GM radiotelephone uses 32-bit floating point DSP for digital signal processing in and after the IF stage. The DSP technology improves a number of functions including noise reduction and various types of interference rejection, ensuring enhanced performance. SYSTEM CONFIGURATION Transmission/Reception Antenna DSC Terminal NCT-196 HF E-mail System (Future Option) WKR Antenna Windows 95/98 Based Parsonal Computer Antenna Tuner NFC-196 RF Cable (5m) Globe E-Mail Software Radiotelephone JSB-196GM Control Cable (5m) DC13. 6V DC-DC Converter NBG-300 (option) DC24V power supply Globe Modem SPECIFICATION General frequency range Frequency increments Frequency tolerance User definable channels Emissions mode Preset ITU channels Scanning channel Communication mode Operating temperature Power requirement Transmit: 1. 6 to 27. 5MHz Receive: 0. 1 to 29. 9999MHz 100Hz ±10Hz or better 200ch (20ch x 10 Groups) J3E(TEL), F1B(DSC/TLX), A1A(CW), H2B, H3E(AME:reception only) 1722ch (TEL:283, DSC:29, TLX:891, CW:519) 20 user defined channels Simplex and semi-duplex -15°C to +55°C 13. 6VDC±10% (12. 3VDC to 15. 0VDC), negative-grounded Tx: 40 A max Rx: 2 A max (Operable between 10. 2VDC and 16. 2VDC) 1. 5m 250mm(W) x 100mm(H) x 260mm(D), Approx. 7. 4kg 100Wpep (1. 6 to 4MHz), 150Wpep (4 to 27. 5MHz) J3E: 3kHz or better F1B, A1A: 0. 5kHz or less 40dB or better 43dB or better 350 to 2700Hz (6dB bandwidth) 600 (-40dBm standard) 600 , 0dBm (balanced) Triple superheterodyne 70. 455MHz, 455kHz, 20. 217kHz J3E: 6. 3µV or better (1. 6 to 4MHz) 3. 5µV or better (4 to 27. 5MHz) F1B: 1. 8µV or better (1. 6 to 4MHz) 1. 0µV or better (4 to 27. 5MHz) J3E: 6dB bandwidh 2. 4 to 3kHz, 66dB bandwidth Within±2. 1kHz F1B: 6dB bandwidh 270 to 300Hz, 60dB bandwidth Within±550Hz Spurious response Clarifier range: AF output Line output: 60dB or better ±200Hz in 1Hz steps 5. 0W max. 1W rated 600 , 0dBm (balanced) NFC-196 ANTENNA TUNER Frequency range 1. 6 to 30MHz Power capability 200Wpep SWR after tuning 2:1 Turning time Automatic tuning: typical 3 sec typical 0. 5 sec Preset tuning: Operating temperature -30°C to +60°C Power requirement 10. 2VDC to 16. 2VDC, negativegrounded , 1. 5A (max) Dimensions and mass 230mm(W) x 380mm(H) x 90mm(D) Approx. 3. 3kg NCT-196 DSC TERMINAL Protocol Modulation rate Modulation accuracy Output frequency Frequency tolerance Output level Operating temperature Power requirement Dimensions and mass ITU-RM. 493-7, M. 541-6 and M. 1082 100 baud Within ±30ppm 1700Hz ±85Hz ±0. 5Hz or better -20dBm to +10dBm -15 to +55°C 10. 2VDC to 16. 2VDC, negativegrounded, 3A max 250mm(W) x 100mm(H) x 260mm(D) Approx. [. . . ] 6. 3kg For further information, contact: Since 1915 URL Maritime Sales Department:1-1, Shimorenjaku 5-chome Mitaka-shi, Tokyo 181-8510, JAPAN Telephone: +81-(0)422-45-9552 Facsimile: +81-(0)422-45-9273 Overseas Branches : Seattle, Amsterdam Liaison Offices : Taipei, Pusan, Manila, Jakarta, New York, Piraeus ISO9001 ISO14001 Certified [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE JRC JSB-196GM




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual JRC JSB-196GM will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.