User manual JENSEN VOYAGER VOM-73SNWIN

[. . . ] · Do not restrict the airflow of this unit by placing it somewhere with poor airflow, by covering it with a cloth, or by placing it on bedding or carpeting. SAFETY INFORMATION · When connecting or disconnecting the AC cord, grip the plug and not the cord itself. · When you are not going to use the unit for a long period of time, disconnect the AC cord. CONDENSATION INFORMATION · When left in a heated room where it is warm and damp, water droplets or condensation may form inside the unit. When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1-2 hours before turning the power on or gradually heat the room and let the unit dry before use. FCC INFORMATION WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could avoid the user authority to operate the equipment. [. . . ] FORMAT Button Press to select the picture format. 5) 6) 7) 8) 9) 10) 11) 12) 13) 1) 2) 3) SLEEP Button Press to set the SLEEP timer. The unit will remain on for the time that is set, and will automatically shut off afterwards. Number (0 - 9 and dot) Buttons In DVD mode, use when creating programs and locating a title/chapter or specific time. In TV and other modes, use when inputting TV channel number and entering a parental control password. LAST CH Button Press to switch repeatedly between the last two channels displayed. 6 14) 15) 16) 17) 18) VOM-73SNWIN- E2-23 JENSEN-DC. pmd 6 06/08/2007, 17:56 UNIT REFERENCE GUIDE 3 4 5 6 7 89 17 10 11 12 1314 15 16 Color LCD Screen STANDBY/ON Button Turns the unit on and off. ­ VOL + Controls Adjusts the volume level and highlight selections (Left & Right) on the menu screen. / Buttons Selects a TV channel and highlight selections (Up & Down) on the menu screen. 3) STANDBY Indicator Indicates whether the unit is ON or in STANDBY (OFF) mode. 1) 2) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) Removable Base Stand DC IN 12V AV OUT Video Output Jack AV OUT Audio Output Jacks (Left/Right) AV IN Video Input Jack AV IN Audio Input Jacks (Left/Right) PC IN MONITOR/VGA Jack PC IN Audio Jack YUV IN Component Video Input Jacks (Y/PB/PR) YUV IN Audio Input Jacks (Left/Right) AV IN S-Video Input Jack Headphone Jack TV Antenna Cable Terminal - Coaxial TV Antenna Input Remote Control Sensor Do not block this sensor or remote control will not work. 7 VOM-73SNWIN- E2-23 JENSEN-DC. pmd 7 06/08/2007, 17:56 CONNECTIONS CONNECTING A TV ANTENNA/CABLE/SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system Connecting a Digital Antenna The tuner in this TV receives ATSC TV signals from an antenna. This digital TV can receive standard (SDTV) and high definition (HDTV) over the air broadcasts. Satellite, Cable, or TV antenna cable to TV ANTENNA CABLE Terminal (cable not included) Connecting an Analog Antenna or Device The tuner in this TV can receive NTSC TV signals, analog cable signals or the RF output from a satellite receiver, VCR or cable box. CONNECTING AN AUDIO AMPLIFIER This connection allows you to use an audio amplifier and external speakers. Connect the right (red) and left (white) audio OUTPUT from this unit to the right (red) and left (white) audio INPUT on your amplifier. · After use, disconnect the car power adapter from both the unit and cigarette lighter socket. USING THE AC POWER ADAPTER The supplied AC adapter operates on AC 120V. · Press the STANDBY/ON button on the unit or remote control to turn on the unit. Note: · The AC adaptor included with this unit is for its use only. · Be sure the AC power cord is disconnected and all functions are off before making connections. · To prevent electrical shock, match wide blade of plug to wide slot of wall outlet, then fully insert. · When you are not going to use the unit for a long period of time, disconnect the power cord. 13 VOM-73SNWIN- E2-23 JENSEN-DC. pmd 13 06/08/2007, 17:57 INSTALLATION REMOVING THE BASE STAND WARNING: The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp, or anything that could scratch or damage the LCD display, come in contact with it. Do NOT place pressure on the front of the unit at any time because the screen could crack. Lay the unit down on a flat surface, so the backside is facing up, making sure to place a soft cushioned material (such as a pillow or thick piece of foam) beneath the screen. Remove the four screws and then remove the BASE STAND from the unit. MOUNTING ON THE WALL This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 3" x 3" (75mm x 75mm) mounting kit designed for flat-panel TVs (sold separately). Mount this unit according to the directions included with the mounting kit. [. . . ] Auto to number number number number When you set the `Time', the option will be shown: · Time Update : Select On/Off to activate the following manual settings; Select synchronize time with the digital TV channel signal. or button to locate the position, and press the · Date : Press the buttons to input date. or button to locate the position, and press the · Time : Press the buttons to input time. or button to locate the position, and press the · Power On Time : Press the buttons to input power on time. [. . . ]