User manual JENSEN VOYAGER VE640

[. . . ] The set time will disappear from the LCD-Display and a v series of dashes will appear (- - : - - , Alarm DEACTIVATED mode). 3) Press the SET button three times to return to the time display on the LCD panel. NOTE: The set time will be stored in memory and can be reactivated whenever desired by performing steps 1-3 of the DEACTIVATING ALARM procedure. 2 13 SEEK 4 5 CH VOL TV ON/OFF A/V FM/AM TEL TV FM/AM AM PM CH1 CH2 CH3 v SET w CH1 CH2 CH3 6 ADDENDUM 128-6181 -2- IMPORTANT SAFETY INFORMATION 1) Unplug the unit before cleaning. 3) Do not install this video product where it is likely to be exposed to water. [. . . ] 7) CH 2 INDICATOR-When illuminated, the VE-640 is tuned to the preset channel 2. 8) CH 3 INDICATOR-When illuminated, the VE-640 is tuned to the preset channel 3. 9) SET-Press this button to set the time, alarm, and the FM/AM broadcast. 10) SEEK UP BUTTON-Press this button for the next higher available channel with sufficient signal strength. 11) SEEK DOWN BUTTON-Press this button for the next lower available channel with sufficient signal strength. 12) UP&DOWN CH-BUTTONS-Press these buttons to increase or decrease the channel to view a specific channel. 13) UP & DOWN (VOL) BUTTON-Press these buttons to increase, or decrease the volume level. -6- 14) CH3-BUTTON-Press this button to view the third user programmed channel. 15) CH2-BUTTON-Press this button to view the second user programmed channel. 16) CH1-BUTTON-Press this button to view the first user programmed channel. 19) TELEPHONE BUTTON (TEL)-Pressing this button allows the user to answer an incoming call. (The VE-640 contains hands free speakerphone). 20) AUDIO-VIDEO BUTTON (AV)-Press this button to view an external A/V source that is plugged into the rear A/V jacks. 21) CONTRAST CONTROL- This control (located on the side of the LCD) adjusts the picture contrast. 22) COLOR CONTROL- This control (located on the side of the LCD) adjusts the color level of the picture. 23) BRIGHTNESS CONTROL-This control (located on the side of the LCD) adjusts the brightness of the picture. 25) TV BUTTON-Press this button to have the VE-640 to switch back to TV mode. 26) FM/AM BUTTON- Allows user to set the VE-640 to receive AM or FM radio broadcasts. REAR PANEL CONNECTIONS AM-ANT. AUDIO-IN VIDEO-IN 5) 1) FM ANTENNA- Allows the VE-640 to be connected to an external antenna for the 6) reception of FM broadcast signals. 2) 75 OHM ANTENNA CONNECTOR 7) Allows the VE-640 to be connected to a 75 ohm external coaxial antenna. 3) AUDIO INPUT-RIGHT-Connect to right audio 8) output from external A/V source. 4) AUDIO INPUT-LEFT-Connect to left audio output from external A/V source. VIDEO INPUT-Connect to the video output from external A/V source. AM ANTENNA-Allows the VE-640 to be connected to an external antenna for the reception of AM broadcast signals. [. . . ] THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 30 MONTHS FROM DATE OF ORIGINAL PURCHASE. [. . . ]