User manual IOMEGA ULTRAMAX PLUS FIREWIRE 400 QUICK GUIDE

[. . . ] NOTE: Never connect the drive to the computer with more than one cable. Connect the other end of the cable to your eSATA PCI card or built-in eSATA connection. Turn on the power switch on the back of the drive and restart your computer. PC Users: Your computer will not recognize the drive until it is reformatted. [. . . ] NOTE: The non-RAID configuration is not supported when the drive is connected to eSATA. If you have files on the drive you want to save, move them to another drive before changing the configuration. *NOTE: The configuration for simple volumes is not supported when the drive is connected to eSATA. Repartition and format your hard drive to complete the volume configuration. Make sure the drive is receiving power (check if the status light is on). pC Users: · Make sure the drive is formatted for use with Windows. If you are connecting to a PCI card, make sure the correct drivers for the card are installed and recognized by your operating system. If you are connecting to USB, check your BIOS to ensure USB is enabled. please refer to your computer's user's guide or manual for instructions. If the drive is still not assigned a drive letter, please visit the support area on www. PC will not start up If your PC will not start up when the drive is connected, the BIOS on the computer probably has a conflict with large capacity removable drives. To work around this problem, power off the drive when starting the computer. A complete user's manual in HTML format is available on the support area on www. Iomega warrants this hardware product to be free from defects in materials and workmanship for the warranty period. This non-transferable, limited warranty is only to you, the first end-user purchaser. The warranty begins on the date of purchase and lasts for a period of one (1) year for product purchased in the Americas or the Asia-Pacific region; ninety (90) days for Iomega reconditioned products purchased in these regions; or, two (2) years for product purchased by an end-user in Europe, the Middle East, or Africa. This warranty does not apply to: (a) Iomega software products; (b) expendable components such as fuses or bulbs; or (c) third party products, hardware or software, supplied with the warranted product. Iomega makes no warranty of any kind on such products which, if included, are provided "AS IS. " This warranty also excludes damage caused by accident , misuse , abuse , use of non-Iomega approved media , exposure of media to excessive magnetic fields , or external environmental causes. Your sole and exclusive remedy for a covered defect is repair or replacement of the defective product, at Iomega's sole option and expense (shipping may be charged), and Iomega may use new or refurbished parts or products to do so. The replaced part/product will be warranted for the remainder of the original warranty or three (3) months from the date of shipment of such parts/products, whichever is longer. If Iomega is unable to repair or replace a defective product, your alternate exclusive remedy shall be a refund of the original purchase price. [. . . ] Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]