User manual IOGEAR GVS74 QUICK START GUIDE

[. . . ] Status Indicator - Single* solid light: device is wirelessly connected to the selected Wireless USB Transmitter - Single* slowly blinking light: device is searching for a Wireless USB Transmitter - Single* quickly blinking light: device is trying to connect to a Wireless USB Transmitter - Rapidly scrolling lights: device is used in wired mode. - Three Simultaneous Blinking Lights: Cable Association Mode *Only one light at a time. The position of the light indicates which Wireless USB Transmitter the device is trying to communicate with. VGA Connector - Connects to one end of the included VGA cable, and the other end to the VGA or DVI port on your display 5. [. . . ] You should see the icon in the Wireless USB Manager appearing in color when it is connected. Still not connected?Double check that the radio for your Wireless USB Transmitter is on in the Wireless USB Manager. 51 Q: My Wireless USB Transmitter is plugged into my computer and my Wireless Audio Receiver is powered on but I do not hear anything. A: Check the Wireless USB Manager to see if there is an icon for your Wireless Audio Receiver. If there is no icon, try unplugging and plugging your Wireless USB Transmitter to your computer, then unplugging and plugging your power adapter to your Wireless Audio Receiver to reset the connection. Q: My Wireless USB Transmitter is plugged into one of the USB ports on my computer and my Wireless Audio and Video Receivers are powered on, but I get this window and I do not hear or see anything. A: Please try to unplug and re-plug the Wireless USB Transmitter into the USB port, and you should see the USB logo becomes colored. Once the USB logo becomes colored, then you should see the Wireless Audio and Wireless VGA icons shows in color and your Wireless Audio & Video Kit should become functional again. Besides unplugging and re-plugging in the Wireless USB Transmitter, you can also try to power cycle the Audio and VGA Receivers as this will help to reset the wireless connection. 52 Q: I already reset my Wireless USB Host Transmitter and Audio Receiver, and the icon does show up in the Wireless USB Manager. A: Windows XP For XP users, please go to Start -> Control Panel -> Sounds and Audio Devices, then select Audio tab and make sure the USB Multimedia Audio Device is selected then click OK. 53 Windows Vista For Vista users, right click on the Speaker icon at the bottom right corner of your system tray, then make sure the "2- USB Multimedia Audio Device" is checked then click Set Default and OK. Q: Why do I get this window during the association process?A: If you idle for more than 45 seconds during the cable association process, you will see this window prompt. Just click OK to close the window, and repeat the association process again and you should not see this window again. Please note, DO NOT idle more than 45 seconds during the cable association process. 54 Connection and Signal Quality related Q&A Q: I successfully installed everything and I can see video and hear audio from my TV, but the signal is bad and I can not get smooth video and audio quality. · Change the channel as shown on the right or move in your computer closer to the display. 56 Video and Audio Receivers Configuration related Q&A Q: I already setup my Wireless USB Transmitter and Audio Receiver, and the icon does show up in the Wireless USB Manager. However, I would like the sound to be streaming from the built-in speakers of my computer, how do I do that?A: First of all, close the multimedia application you are currently running, and you have to change the playback device settings to activate the built-in speakers on your computer. For Windows XP users, please go to Start -> Control Panel -> Sounds and Audio Devices, then select Audio tab and make sure to select your default audio device and click Apply then OK. Do not select USB Multimedia Audio Device as this is the driver for Wireless Audio Receiver. For Vista users, right click on the Speaker icon at the bottom right corner of your system tray, then right click on your default speaker device and select Set as default device on the device and click OK. DO NOT select 2- USB Multimedia Audio Device as this is the driver for the Wireless Audio Receiver. Now you may restart the multimedia application you were using for your music, and the music should be coming off from the built-in speakers on your computer. 57 Q: An error message shows up when I tried to associate the Audio Receiver with my system, and it says that the device does not function correctly. When I go into the Device Manager trying to examine the device, there is a yellow exclamation mark (!) next to the audio device. Additionally, the Device Status area displays the following error message: "This device cannot start. A: This problem usually occurs on Windows Vista Service Pack 1 (SP1), but not on the original version of Windows Vista OS. To resolve this issue, Microsoft offers a hotfix addressing this issue, and you can download the hotfix from this link, http://support. microsoft. [. . . ] Note: After this upgrade, the Wireless USB Host Adapter (GUWA100U) will not function with the Wireless VGA Receiver (GUW2015V) or the Wireless USB Hub (GUWH104) on the PC system where the GUW2015VKIT software has been installed. However you may use this Wireless USB Host Adapter (GUWA100U) on a different PC. Cable association with other devices Association Concept: In order to establish a secure wireless connection between both the Wireless USB Transmitter and the Wireless USB devices, you will need to go through the cable association process. The association process will allow the Wireless USB Transmitter and the Wireless USB device to exchange security information about each other necessary to operate in a secured wireless mode. [. . . ]