User manual IOGEAR GUWH104

[. . . ] In this mode, the Wireless USB Hub will automatically connect to the Wireless USB Host Adapter. This mode is only needed if your Wireless USB Hub has already been successfully associated with more than one Wireless USB Host Adapter-PC combination. Set S2 to Manual Association mode and then use the Host Selection button to manually cycle through the three choices for which Wireless USB Host Adapter-PC combination to connect to. Using this button, you can force the Wireless USB Hub to connect to one of three pre-associated PCs of your choosing. 1 2 3 Side View: WIRED WIRELESS AUTO MANUAL HUB ASSOC. [. . . ] Once the IOGEAR Wireless USB Hub has been associated and then connects wirelessly, the driver will be installed automatically. 16 Frequently Asked Questions 1. Solution: Check the power supply's connection to the Wireless USB Hub. Problem: LED does not light up after inserting a USB device into a peripheral port on the Wireless USB Hub. Solution: Remove the Wireless USB Host Adapter from the PC and disconnect the power supply from the Wireless USB Hub. Re-insert the Wireless USB Host Adapter and reconnect power to the Wireless USB Hub. Solution: Remove the Wireless USB Host Adapter from the PC and disconnect the power supply from the Wireless USB Hub. Re-insert Wireless USB Host Adapter, connect the power supply to the Wireless USB Hub and wait for the wireless connection. Solution: Verify that the USB device has the ability to operate when connected to a hub of any kind by checking with the product documentation. If the USB device does not have the functionality to operate with a wired hub, then it will not work with the Wireless USB Hub. Also, verify that the latest drivers for the product are being used by going to the manufacturer's website and downloading the most up-to-date drivers. 17 3. 4. 5. Problem: USB web-cameras, USB speakers, or Bluetooth devices do not work with the Wireless USB Hub. Solution: Isochronous products such as USB web-cameras, USB speakers, and Bluetooth devices are not currently supported. Problem: USB printer has loaded drivers correctly when connected to the Wireless USB Hub, however, nothing will print. Solution: Verify that the latest software has already been installed on the PC from the product website. If the printer was installed previously when connected directly to the PC, the printer was installed as "Model Name". When the printer driver is installed when connecting to the Wireless USB Hub, the printer is installed as a "Model Name (Copy 1)". If the printer was never directly connected to the PC and drivers were never installed, when it is connected to the Wireless USB Hub, the printer will install as "Model Name" when installing the printer drivers. When printing to the printer when it is connected to the Wireless USB Hub, verify that the correct printer is being selected in the printer options window by selecting the correct model name to print to. 6. 18 7. Problem: The throughput of USB Hard Drive or USB Flash drive is less when plugged in the Wireless USB Hub than when plugged directly to the PC. Solution: Due to the protocol overhead of Wireless USB, you will experience a slower throughput wirelessly than over a wired connection. 19 Technical Support To help IOGEAR® customers obtain the highest level of performance from their Wireless USB devices, the IOGEAR® Service Support team is available to answer your technical questions. Do not hesitate to call if you are having trouble getting your device to work correctly. [. . . ] 23 Hubble Irvine, CA 92618 P 949. 453. 8782 F 949. 453. 8785 Visit us at: www. iogear. com © 2007 IOGEAR. M0426 IOGEAR, the IOGEAR logo, are trademarks or registered trademarks of IOGEAR, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other brand and product names are trademarks or registered trademarks of their respective holders. [. . . ]