User manual IOGEAR GHDMIS3 QUICK START GUIDE

[. . . ] ASSOC S1 Wired S2 4 5 Wireless Auto Manual (recommended) (recommended) 9 Installation Before we get started, please NOTE: Do not place Wireless USB devices under direct sunlight or near high heat emitting devices; Do not place Wireless USB devices near water or wet surfaces to avoid electric hazards; Do not place Wireless USB devices on any moving or unstable surfaces; 10 Hardware Preparation 1. Remove the Wireless USB Hub, USB 2. 0 A to Mini B Cable, power adapter, antenna and the installation CD from the package. During a one-time-only installation, the Wireless USB Hub needs to be close to your PC. After installation the Wireless USB Hub can be moved to a more permanent location. [. . . ] To install the Wireless USB Hub drivers, insert the included CD into your computer. If not, select "Run CD_Start. exe" OR navigate to the CD Rom drive containing the installation CD and double-click on CD_Start. exe to bring up the user menu. Click on Driver Installation to begin the installation process. 12 2. The first window will explain that Wireless USB Hub driver is going to be installed on your computer, so select - Next. 3. The following window will request that you agree to the License Agreement before proceeding with installation, select I accept and click Next. 13 4. The window shown below allows you to select where the files for the Wireless USB Hub are installed and stored. The following window confirms that you are approving installation, select Install. 14 6. Once you have selected Install the Wireless USB Hub driver installation will begin and show the status in a window similar to the one shown below. 7. Once the Wireless USB Hub driver has been installed properly, you will see a window similar to the following stating installation has completed. Select "Finish" to finalize the driver installation. 15 Driver Installation Follow the instructions included with the PC or the manufacturer of the Wireless USB Host Adapter for software and driver installation. Once the IOGEAR Wireless USB Hub has been associated and then connects wirelessly, the driver will be installed automatically. 16 Frequently Asked Questions 1. Do not hesitate to call if you are having trouble getting your device to work correctly. IOGEAR® Service Support can be reached by phone from 24 hours a day, 7 days a week or through the following address during normal business hours. Toll Free: 866-946-4327 (USA) Phone: 949-453-8782 23 Hubble Irvine, CA 92618 You may also reach us online at www. iogear. com/support 24 hours a day. Please be ready to give a brief description of the problem, and what you were doing when the problem occurred, before calling Service Support. The Service Support representative will be able to serve you much quicker if you are prepared to answer the seven questions listed below. 20 1. What have you already tried to get the problem resolved? 21 Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose. The direct vendor also reserves the right to revise or update the device or documentation without obligation to notify any individual or entity of such revisions, or updates. For further inquiries please contact your direct vendor. 22 Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] This device is authorized under 47 CFR 15. 519 (the FCC Rules and Regulations). The operation of this device is subject to the following restriction: This UWB device shall transmit only when it is sending information to an associated receiver. This UWB device shall cease transmission within 10 seconds unless it receives an acknowledgement from the associated receiver that its transmission is being received. An acknowledgement of reception must continue to be received by the transmitting device at least every 10 seconds of operation or the UWB device must cease transmitting. 23 Contact IOGEAR, INC. [. . . ]