User manual IOGEAR GCS932UB INSTALLATION GUIDE

[. . . ] Console USB Mouse Port Console USB Keyboard Port LEDs Console DVI-D Video Port Console Mic. Port Console Audio Port 10 7 1 2 3 4 5 6 6 8 9 11 12 13 Standard Installation Step 1 Please make sure your computers and monitor are powered off before you start. Step2 Connect the DVI cable from your monitor to the console DVI monitor port. [. . . ] Port Switching via Remote Switch Button Simply press the remote switch button once to switch focus to the next port. Port Switching via Mouse Simply press scroll wheel button twice rapidly to switch focus to the next port. * *Note: This feature requires a mouse that has a scroll wheel. Also, this feature can only be used when both Mouse Emulation Mode and Mouse Port-Switching Mode are enabled. Port Switching via Hotkey Commands To trigger a Hotkey Mode, simply press [Scroll Lock] [Scroll Lock]**. **Note:Ifthereisaconflictusing[ScrollLock] [Scroll Lock] sequence, you can change to the alternative sequence [Ctrl] [Ctrl] by press and holding the remote switch button for 3 seconds. When you press and hold the remote switch button for 3 second when the sequence is [Ctrl] [Ctrl], it will change the sequence back to [Scroll Lock] [Scoll Lock]. 13 Hotkeys Summary Table Hotkey combination [Enter] [k] [Enter] [s] [Enter] [a] [Enter] [Scroll Lock] [Scroll Lock] + or [Ctrl] [Ctrl]* + [x] [Enter] *Note: If alternative hotkey sequence is chosen [m] [Enter] [d] [Enter] [w] [Enter] [F2] [Enter] [F3] [Enter] [a] [Enter] [n] Description Switch KVM and audio focus to the next port Switch KVM focus to the next port Switch audio focus to the next port Activate Autoscan Mode. It will toggle between the two computers every 5 seconds Activate Autoscan Mode. It will toggle between the two computers with the specifictimedependingontheinterval[n]thatyouhaveinput. Pleasesee Autoscan Interval Table for details. Change hotkey sequence to the alternative sequence Enable/disable mouse emulation Captureandstoremonitor'sEDIDonspecificport Enable/disable mouse port-switching function Note: If you enable this feature when Mouse Emulation Mode is disabled, Mouse Emulation Mode will be enabled automatically Enable Mac keyboard emulation Enable Sun keyboard emulation 14 Hotkey combination [Scroll Lock] [Scroll Lock] + or [Ctrl] [Ctrl]* + [F5] [Enter] *Note: If alternative hotkey sequence is chosen [F10] [Enter] [r] [Enter] [F4] [Enter] Description List out current settings Note: Please have a Notepad or word document opened before you trigger this function. Perform a USB keyboard and mouse reset Auto detect keyboard operating system Resets to factory default settings 15 Autoscan Interval Table n 1 2 3 4 Description 3 seconds 5 seconds (default) 10 seconds 20 seconds 16 Mac Keyboard Emulation The PC compatible (101/104 key) keyboard can emulate the functions of the Mac keyboard. PC Keyboard [Shift] [Crtl] Mac Keyboard Shift Ctrl [Ctrl] [1] [Ctrl] [2] [Ctrl] [3] [Ctrl] [4] [Enter] [Backspace] [Insert] [Ctrl] [Alt] [Print Screen] [Scroll Lock] Alt F13 F14 = Return Delete Help F15 *Note:Whenusingkeycombinations, pressandreleasethefirstkey(Ctrl), thenpressandreleasethe second key. 17 Sun Keyboard Emulation The PC compatible (101/104 key) keyboard can emulate the functions of the Sun keyboard. PC Keyboard [Crtl] [t] [Crtl] [F2] [Crtl] [F3] [Crtl] [F4] [Crtl] [F5] [Crtl] [F6] [Crtl] [F7] [Crtl] [F8] Sun Keyboard Stop Again Props Undo Front Copy Open Paste [Ctrl] [F9] [Crtl] [F10] [Crtl] [1] [Crtl] [2] [Crtl] [3] [Crtl] [4] [Crtl] [h] Help Compose Find Cut *Note:Whenusingkeycombinations, pressandreleasethefirstkey(Ctrl), thenpressandreleasethe second key. 18 Factory Default Settings Function Autoscan Interval Hotkeys Keyboard Operating Platform Mouse Emulation Mouse Port-Switching Default Setting 5 seconds [Scroll Lock] [ Scroll Lock] PC compatible On Off 19 Firmware Upgrade Note:Inordertoperformafirmwareupgrade, you need to use a computer that's not connected to the KVM. Step 1 Go to www. iogear. com to download the latest availablefirmwareorthespecificfirmwarethatyou wish to upgrade to. Step 2 Please make sure all the computers that are connected to the KVM are completely shutdown. Step 3 Press and hold the remote switch button of the KVM while connecting the 2 USB connections of a set of KVM cable to the computer that you will use toperformthefirmwareupgrade. Whenyousee the2LEDsareflashingontheKVM, youcannow release the remote switch button. Note: The computer that you use to perform the firmwareupgrademustbepoweredonbeforeyou connect the 2 USB connections to it. 20 Step 4 Windows will now install all the required drivers. You may see the below message popup in tray icon area. Step 5 After you see the below message "Your new hardware is installed and ready to use. ", extract thedownloadedfilewithWinRARorcompatible software. Thendoubleclickontheexecutefileto begin with the Firmware Upgrade Utility. 21 Step 6 Read the License Agreement and click "I Agree" then click "Next" if you wish to continue with the firmwareupgrade. Otherwise, click"Cancel"toexit. Step 7 Choose the correct KVM that you wish to perform firmwareupgradefromthe"DeviceList"andthen click "Next" to continue. Then the Firmware Upgrade Utility will verify if there is a KVM connected to the computerbythefirmwareupgradecable. (Check Firmware Version checkbox is optional) 22 Step 8 If you have checked the "Check Firmware Version" checkbox, then the utility will check the current firmwarethatisonyourKVM. Ifthecurrentfirmware isnewerthanthefirmwarethatyouwishtoupgrade to, a window will popup and prompt you to ask if you wish to proceed. [. . . ] this device must accept any interference, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. EndusersmustfollowthespecificoperatinginstructionsforsatisfyingRFexposurecompliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 26 CE Statement This device has been tested and found to comply with the requirements set up in the council directive on the approximation of the law of member states relating to EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC and R&TTE Directive 99/5/EC. [. . . ]