User manual INFINITY KAPPA FOUR

[. . . ] · Make sure there is sufficient air circulation at the mounting location for the amplifier to cool itself. Specifications · 125W RMS x 4 channels @ 4 ohms <1% THD + N* · 150W RMS x 4 channels @ 2 ohms <1% THD + N* · Total peak power: 1200W · Frequency response: 10 to 75kHz (-3dB) · Maximum input signal: 6V* · Maximum sensitivity: 200mV* · THD + N: 0. 05% · Signal-to-noise ratio: 85dBA (reference to 1 watt) · Signal-to-noise ratio: 106dBA (reference to rated power) * CEA-2006A-compliant 0 Speaker Output Connectors · Connect the speakers to these terminals, observing proper polarity. · Four-channel operation: Connect the front left speaker to the Front L+ and L­ terminals, and the front right speaker to the Front R+ and R­ terminals. [. . . ] · FULL: Select for full-range speakers when no subwoofer will be used in the system. · HP: Select for midrange speakers or full-range speakers when a subwoofer is used in the system. 9 Front Input-Level Control · Used to match the front input level of the amplifier to the output level of the source unit. · FLAT: Select for full-range speakers when no subwoofer will be used in the system. · HP: Select for midrange speakers or full-range speakers when a subwoofer is used in the system. B Front Crossover-Frequency Control · 12dB/Octave crossover, variable from 32Hz to 320Hz. C Rear Input Connectors (RCA) · Connect to rear RCA outputs from the source unit, or signal processor. D Input Assignment Switch · FRT: Sends the RCA front stereo signal to the amplifier's inputs. · REAR: Sends the RCA rear stereo signal to the amplifier's inputs. · SUB: DO NOT USE E Rear Channel-Assignment Switch · Determines the routing of the input signal for the RCA. · LEFT: Sends the input signal from the left input to both rear amplifier channels. · STEREO: Sends the signals from the left input to the left rear output channel and the signal from the right input to the right rear output channel. (This is typical operation mode. ) · RIGHT: Sends the input signal from the right input to both rear output channels. F Front Channel-Assignment Switch · Determines the routing of the input signal for the RCA. · LEFT: Sends the input signal from the left input to both front amplifier channels. · STEREO: Sends the signals from the left input to the left front output channel and the signal from the right input to the right rear output channel. (This is typical operation mode. ) · RIGHT: Sends the input signal from the right input to both front output channels. G Input Assignment Switch · FRT: Sends the RCA front stereo signal to the amplifier's inputs. [. . . ] Note: Acceptable frequency ranges indicated in gray. · REM: Connect to the "Remote Out" lead from the source unit or to a source of switched +12V (ACC). This product is designed for mobile applications and is not intended for connection to the mains. Features, specifications and appearance are subject to change without notice. Declaration of Conformity We, Harman Consumer Group, Inc. 2, route de Tours 72500 Château du Loir France declare in own responsibility that the product described in this owner's manual is in compliance with technical standards: EN 61000-6-3:2001 EN 61000-6-1:2001 Klaus Lebherz Harman Consumer Group, Inc. [. . . ]