User manual HUNTER 37251

[. . . ] Thank you for purchasing The Care Free® Humidifier Plus Evaporative Humidifier by Hunter Fan Company. Please read and save these instructions to receive the maximum benefit and performance from your humidifier. How the Care Free® Humidifier Plus Evaporative Humidifier Works The Care Free® Humidifier Plus Evaporative Humidifier has a unique patented design with several innovative features: · Low Maintenance ­ Other humidifiers have paper filters that need to be replaced every few months. It's designed to last season after season, saving up to $45 a year. · Pump System ­ By dispersing water from the top of the PermaWickTM filter, stagnant water around the PermaWickTM filter is eliminated, and the buildup of mineral 41711-01 11/28/2005 residue that can clog the filter and impede performance is eliminated. [. . . ] The night light can be turned on even if the humidifier fan is turned off. Speed Control Power Light Power Control NiteGloTM Night Light Control Figure 7 41711-01 11/28/2005 6 ©2005 HUNTER FAN CO. 41711_Rev 11-28-05. indd 6 11/28/05, 3:26:43 PM Using Your Humidifier 1. Remove The Care Free ® Humidifier Plus Evaporative Humidifier from its packaging. Always place the humidifier at least six (6) inches away from walls and sources of heat. Lift the main housing to confirm that the PermaWickTM filters are placed upright in the slots. Turn the tank upside down and unscrew the tank cap by turning it counterclockwise. Fill the water tank with cool water and replace the tank cap (Never use hot water). Be sure not to overfill the tank as water damage may occur to furniture or flooring due to spillage. HUNTER WILL NOT ACCEPT RESPONSIBILITY FOR DAMAGE TO PROPERTY CAUSED BY WATER SPILLAGE. If the tank is properly located on the base, you will see air bubbles flowing up into the tank. With the power control knob in the `OFF' position, plug the humidifier into the wall. CAUTION: Never plug in the Humidifier while your hands are wet as Electric Shock could occur. Place the full tank on the unit and allow the water to fill the bottom tray. The water is at the proper level in the bottom tray when the tank stops bubbling. Run the unit on "HI" speed for 11/2 minutes for optimum pump operation. Use the power control knob to turn the humidifier `ON' by selecting a speed setting. You can choose the desired humidity output by adjusting the Adjustable Humidistat knob. In a very dry room, the "HI" setting should be used to quickly achieve a comfortable level of humidity. Once the room is comfortable, you can turn the Adjustable Humidistat down. Selection of your desired humidity level is a personal choice and you may have to adjust the dial to find the level where you feel most comfortable. To begin with, we suggest you try a middle location between the lowest and the maximum setting. When the humidity reaches the level you have set, the "Desired Humidity" light will be illuminated. The humidifier will not output humidity while the humidity in the room is at the selected humidity level. [. . . ] This warranty excludes and does not cover defects, malfunctions, or failures of the Humidifier which were caused by repairs by persons not authorized by us, use of parts, or accessories not authorized by us, mishandling, modifications, or damage to the Humidifier while in your possession, or unreasonable use, including failure to provide reasonable and necessary maintenance. This warranty does not cover humidifiers used in commercial applications. There are no express or implied warranties as to commercial purchasers or users. To obtain service, contact the nearest Hunter authorized service centre or the Hunter Fan Company Service Department, 2500 Frisco Avenue, Memphis, Tennessee 38114, 901-248-2222. [. . . ]