User manual HP SCANJET 7400C

[. . . ] Warranty The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with respect to this information. hEWLETT-PACKARD SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for any direct, indirect, incidental, consequential, or other damage alleged in connection with the furnishing or use of this information. [. . . ] Make sure the SCSI chain is less than 20 feet (6 meters) long, including any cabling to SCSI devices inside the computer. If other SCSI devices are connected to the computer, make sure the scanner is the last physical device in the SCSI chain. Disconnect all other SCSI devices and connect the scanner directly to the computer to see if the problem is with the scanner or with another SCSI device or cable. Make sure that any SCSI devices connected between the computer and the scanner have their termination turned off. The SCSI address (also called the SCSI ID) for the HP scanner is preset to 2. If you have other SCSI devices attached to this SCSI card, you may need to change the scanner address to prevent address conflicts. If this is the case, use the following procedure only AFTER installing the scanning software. To change the SCSI address 1 Find an available address using the documentation that came with the computer. Do not choose the addresses for the SCSI card, typically 7, and the hard disk drives, typically 0 or 1. Use the NUMBER OF COPIES button on the scanner to select a number for the SCSI address. The number changes on the front panel display as you press the button. To exit the SCSI address settings, press any button on the scanner except the button. The Uninstall option of the setup program allows you to remove the scanning software from your computer. to uninstall software 1 Unplug the scanner , and then restart the computer. Note: If you do not unplug the scanner and restart the computer before you uninstall the software, some files are not removed from your computer during the uninstallation. (If the HP Scanning Software window does not appear, double-click the icon for the HP Scanning Software CD. ) Double-click the HP Scanning Software Installer , and then follow the instructions on the screen. When the main installation dialog box appears, select Uninstall from the pulldown menu (located in the upper-left part of the dialog box). After the uninstall finishes, quit the HP Scanning Software Installer. This section provides information for finding support for your scanner, the warranty, and specifications. HP provides several resources on the Web to provide help with your scanner whenever you want. Once you enter the section that covers your scanner model, you will be able to choose information about setting up and using your scanner, downloading drivers, solving a problem, ordering, and information about the warranty. [. . . ] ) As an ENERGY STAR® Partner, HewlettPackard Company has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. ADF Feature Size Weight Paper tray capacity Maximum paper size Minimum paper size Maximum paper weight Minimum paper weight Power requirements Speed Specification 535 by 290 by 90 mm (21. Supplier's Name: Supplier's Address: Hewlett-Packard Company Colorado Digital Imaging 700 71st Avenue Greeley, CO 80634 USA CDI Regulatory Manager 970-350-4000 HP ScanJet 7400C, HP ScanJet 7450C, HP ScanJet 7490C C7710A (Base Scanner), C7717A or C7718A (Worldwide), C7713A or C7715A (US Commercial), C7712A or C7714A (US Retail) C7671B (transparency adapter); C7716B (automatic document feeder; may contain different suffix) The supplier listed above declares that this product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. [. . . ]