User manual HP SCANJET 4850 PHOTO SCANNER

[. . . ] HP Scanjet 4800 series Photo Scanner User's manual HP Scanjet 4800 series User's Manual Copyright and license © 2005 Copyright Hewlett-Packard Development Company, L. P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] Open the scanner lid. 2. Remove the TMA cover by releasing the latch and pulling the cover up and toward you. 3. Place the negatives into the appropriate template. Touch them only on their edges. ­ ­ Place 35 mm negative frames in the negatives template. Place medium-format or large-format film strips in the large-format template. 12 HP Scanjet 4800 series Note If a light shield is provided, use the negative light shield to cover the remaining area in the in the negative holder if you are scanning fewer than the maximum number of negative frames with the TMA. Align the arrow on the template with the corner reference mark on the scanner bed. ) on the scanner, or click Scan Film in HP Press the Scan Film button ( Solution Center. If you want to preview the scanned picture, select the Show Preview check box on the screen, or begin the scan from HP Solution Center. The scan is sent to the destination selected in the HP Scanning dialog box. Replace the TMA cover, inserting the hooks into the openings in the lid before snapping the cover latch closed at the top. 6. Tips for scanning transparent items To scan items larger than those that the transparent materials adapter (TMA) accepts, place the transparency on the scanner glass, place a white sheet of paper on top of the transparency, and then scan as usual. When scanning a 35 mm slide or negative, the scanner software automatically enlarges the image to approximately 10 cm x 15 cm (4 x 6 inches). If you want the final image to be larger or smaller, use the Resize tool in the scanner software to set the scaling to the final size that you select. The scanner will scan the item to the size that you select and adjust the scan resolution as appropriate. User's Manual 13 Chapter 1 To scan positives, such as 35 mm slides, or negatives by using the TMA, press the Scan Film button ( ) on the top of the scanner, or click Scan Film in HP Solution Center. When cropping images, completely remove the borders to reduce excess light interference. A cropped image from a slide Make copies Use the Copy button ( ) to scan an original and send it to a printer. The front panel Copy button is optimized to scan and print a duplicate of what is on the scanner glass. If you want to change the image, such as lighten, darken, or adjust size, use the Make Copies button in the HP Solution Center. Place the original face down on the scanner glass, as indicated by the reference marks. Note There is no preview image for the copy function. Share a scanned document or picture Use the Scan to Share button ( ) to scan pictures or documents from the scanner glass and send the scans to HP Instant Share, if available, or to a supported e-mail program as an attachment. E-mail is the recommended option for sharing single-page or multiple-page text documents. Place the original face down on the scanner glass, as indicated by the reference marks. Note If you select E-mail, you can change the file type and save options. For more information about HP Instant Share, see the onscreen Help for HP Instant Share. After you click Done, the software sends the scanned file to HP Instant Share or to your default e-mail program. 14 HP Scanjet 4800 series Note If Show Preview was selected, you must click the Accept button in the preview screen to initiate the scan. When prompted, click Yes to scan additional pictures, or click No to send the scanned image(s) to the specified location. Do one of the following depending on the destination that you selected: ­ HP Instant Share: choose from several options for sharing your scanned images with friends and family. [. . . ] Reinstall using the HP Image Zone software CD that came with your scanner. When you insert the CD, an installation interface launches automatically. Choose the HP Image Zone software to install. 5. If the scanner still does not work, visit www. hp. com/support or contact HP Customer Support. Additional troubleshooting information If you have the HP Image Zone software installed, you can use the onscreen Help to solve other problems with the scanner. To gain access to the Help, open HP Solution Center, click Help, and then click HP Scanjet 4800 series scanner Help. [. . . ]