User manual HP PSC 1310
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP PSC 1310. We hope that this HP PSC 1310 user guide will be useful to you.
 |
You may also download the following manuals related to this product:
HP PSC 1310 Quick Start (2079 ko)
HP PSC 1310 Reference Guide (2758 ko)
Manual abstract: user guide HP PSC 1310
Detailed instructions for use are in the User's Guide.
[. . . ] Follow the steps in order.
If you have problems during setup, see Troubleshooting in the last section.
Remove all tape
Lift the access door and remove tape inside the left side of the device.
3
Title in HP Futura Book 14-20 pt. , centered
Subtitle in 10-14 pt. , centered, white
Magyar Italiano Japanese Español Norsk Português Russian Simplified Chinese Slovencina Slovenscina Español Svenska TraditionalChinese Thai Türkçe Ukrainian © 2004 Hewlett-Packard Development Company, L. P. [. . . ] The contents of your box may differ.
Horizontal cover image: Replace this guideline area with either a cropped product photograph or a straight-on front-view illustration
HP PSC 2350 series all-in-one Setup Guide
4
Attach the control-panel overlay (if not attached)
a Position the controlpanel overlay above the device. b Press down firmly on all edges of the overlay to secure it.
The control-panel overlay must be attached for the HP all-in-one to work!
5
Lift the color graphics display
Raise the color graphics display.
For best viewing, remove the protective film from the display.
6
a
Load plain white paper
b
c
d
2 · HP all-in-one
7
Connect the power cord and adapter
8
Press the On button and configure
On a After you press the On button, the green light flashes, and then becomes solid. b Wait for the print cartridge prompt before continuing.
9
Open access door
Lift the access door until it stops.
10
Remove tape from both cartridges
Pull the pink tab to remove the tape from both print cartridges.
Do not touch the copper-colored contacts or retape the cartridges.
3 · HP all-in-one
11
Insert the tri-color print cartridge
The device must be On before you can insert the print cartridges. c Push the cartridge firmly into the slot until it snaps into place.
12
Insert the black print cartridge
a Hold the black print cartridge with the HP label facing up. Turn the power on again.
Problem: Action:
The Check Print Cartridge message appears after you insert print cartridges or the print cartridge alignment fails. (Windows only) You did not see the screen telling you when to connect the USB cable. Refer to Step 15.
Problem:
Action:
Problem:
(Windows only) The Microsoft Add Hardware screen appears.
Action:
Click Cancel. (Windows only) The Device Setup Has Failed To Complete screen appears. [. . . ] Refer to Steps 4 and 16.
Problem: Action:
Problem: Action:
(Macintosh only) The Macintosh software does not install. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HP PSC 1310
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP PSC 1310 will begin.