User manual HP PHOTOSMART E327V

[. . . ] Make sure the lens cover is closed (the camera is off). 2 Take some photos 1. The lens cover is the on/off switch for the camera. 3 Review your photos Use the photo LCD to review your photos before you download them to your PC. [. . . ] Close the lens cover to turn the camera off. 5 Connect the camera to the computer 1. Plug the large end of the PC connection cable into the PC serial port. When you connect the camera to the computer, the HP PhotoSmart photo finishing software starts and begins displaying your photos in the Select view. Note that the photos are not yet saved on your computers hard driveyou save them in the Save view. 2. When you see the green light in the viewfinder, press the button all the way down. The camera will beep to let you know the picture has been taken. 2. Use the arrow buttons to select the day (date) of the month, then press OK. The application you are exporting to must be open on your computer. Print View Use the Print view to print the selected images. Tip: If you just want to print one photo, select only that photo (deselect all others), and turn OFF Index Print. Click here to begin printing. Captions print below each image, if you entered them in the Adjust view. You can include all of your images on the Index Print, or just the selected images. This section contains additional options that change for each view. This number is the amount of disk space available on your computers hard drive. Printed in Singapore 8/98 Printed on recycled paper Look here to see how many of the images are selected. Look here to see the status of the software, such as if photos are loading from the camera. Mark all the images as selected. [. . . ] Printed in Singapore 8/98 Printed on recycled paper Look here to see how many of the images are selected. Look here to see the status of the software, such as if photos are loading from the camera. Mark all the images as selected. [. . . ]