User manual HP PHOTOSMART 812

[. . . ] hp photosmart 812 digital camera user's manual Trademark and copyright information © Copyright 2002 Hewlett-Packard Company All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. The information contained in this document is subject to change without notice. Hewlett-Packard shall not be liable for errors contained herein or for consequential damages in connection with the furnishing, performance, or use of this material. [. . . ] NOTE You can also connect your camera to a computer by using the optional HP camera dock. NOTE If you are using a Macintosh computer, switch the camera to Disk Drive in the USB Configuration menu found in the Setup menu. 2 Open the rubber door on the side of the camera, and connect the round end of the USB cable to the USB/TV connector on the camera. The HP Image Unload software will launch on your computer, and the images in the camera will automatically unload to the computer. If there were any images on the camera that had been selected in the Share menu for printing or e-mail, those actions are started after the images have been unloaded to the computer. 4 When the unload screen says "Finished", your images have been saved and shared. 5-Connecting 41 Connecting to a printer You can connect the camera directly to HP DeskJet and Photosmart printers that have a USB connection. You can then print images selected from the Share menu or all images in the camera. Your camera came with a special USB cable for connecting the camera to a printer. NOTE You can also connect your camera to a printer by using the optional HP camera dock. 2 Open the rubber door on the side of the camera and connect the round end of the USB cable to the USB/TV connector on the camera. 3 After connecting the camera to the printer, the Print Setup screen appears on the camera. Follow the on-screen instructions to complete the printing process. 42 hp photosmart 812 user's manual Connecting to a television NOTE If you have the optional the HP camera dock, see Connecting to the HP camera dock later in this chapter. 1 To connect the camera directly to a television, you must first purchase a custom cable (HP #Q2146-61601). This cable is listed in the accessory catalog included in the camera box. 2 On the camera, check that the TV Configuration setting in the Setup menu is set for your area. 3 Connect the TV cable to the USB/ TV connector on the camera, and then to the Audio/Video input on the television. 4 Refer to the documentation for your television to determine how to set the television to take video input from your camera instead of the antenna or cable TV. 5 When connected, the camera starts a slide show of each image, playing any attached audio clip or video clip, and then fading to the next image. NOTE The Display on the camera turns off when the camera is connected to a TV. You can also manually scroll through the images by pressing the Left/Right arrows on the camera. NOTE You can still use the Main and Share while connected to the television. [. . . ] Petersburg) Saudi Arabia 800-897-14440 Singapore +65 6272-5300 Slovakia +421 2-6820-8080 South Africa 086-000-1030 (RSA) +27 11-258-9301 (outside RSA) Spain +34 902-321-123 Sweden +46 (0)8 619-2170 Switzerland +41 (0)848-80-11-11 Taiwan 0800-010055 72 hp photosmart 812 user's manual Thailand +66 (2) 661-4000 Turkey +90 216-579-7171 Ukraine +7 (380-44) 490-3520 United Arab Emirates +971 4-883-8454 United Kingdom (UK) +44 (0) 207-512-52-02 Venezuela 800-477-7777 Viet Nam +84 (0) 8-823-4530 Hewlett-Packard limited warranty statement The HP photosmart 812 camera comes with a one year limited warranty. HP warrants to you, the end-user customer, that HP hardware, accessories, software, and supplies will be free from defects in materials and workmanship after the date of purchase, for the period specified above. If HP receives notice of such defects during the warranty period, HP will, at its option, either repair or replace products which prove to be defective. Replacement products may be either new or equivalent in performance to new. [. . . ]