User manual HP PHOTOSMART 435XI

[. . . ] Camera front, side, and bottom NOTE: If using rechargeable NiMH batteries, fully charge the batteries before using them the first time. These have a short life and are intended to let you begin using your camera immediately. When the camera warns that the battery charge is low, HP recommends replacing them with Photo Lithium or rechargeable NiMH batteries for longer battery life. This graph shows the approximate average number of pictures you can take using Photo Lithium, NiMH, and Alkaline batteries. [. . . ] Many additional factors affect the actual number of pictures you can take (see Extending battery life on page 21). Along with the language setting, the region setting determines the default date format. Accurately setting the date and time will help you locate images once you have transferred them to your computer, and will ensure that images are accurately marked if you use the date and time imprint feature. Use selections and repeat Step 1 until the date and time are set correctly. Press when the date, Setting up your camera 9 Time, and format settings are correct, then press again to confirm. This camera supports standard, high speed, and high capacity Secure Digital (SD and SDHC) memory cards, 32MB to 8GB. NOTE: When you turn on your camera with a memory card installed, the camera indicates the number of images you can store on the memory card at the current Image Quality setting. This camera supports storing a maximum of 2000 images on a memory card. Formatting removes all images from the memory card, so make sure to transfer existing images before formatting. Once you install a memory card, all new images and video clips are stored on the card, rather than in internal memory. To use internal memory and view images stored there, turn off the camera then remove the memory card. When the Image Display indicates that the camera is connected to the computer, follow the instructions on the computer screen to transfer the images. If you have installed the HP Photosmart Software and need more information, see the Help feature in the HP Photosmart Software. You can connect the camera to any PictBridgecertified printer to print images. Check that the printer is turned on, there is paper in the printer, and there are no printer error messages. Turn off the camera, connect the camera and printer using the USB cable that came with your camera, then turn on the camera. When the camera is connected to the printer, the Image Display shows an image. After the printer has printed the image, disconnect the camera from the printer. To learn about other printing options, see either the electronic User Guide or Camera Help located in any menu. To learn more about these camera features, refer to the electronic User Guide or on-camera Help. picture Capture , Video Record , and Playback · Picture Capture allows you to frame pictures in the Image Display and take pictures. Camera Menus Menus allow you to adjust camera settings, work with images, and access camera Help. [. . . ] Camera Menus Menus allow you to adjust camera settings, work with images, and access camera Help. Picture Capture Menu--Allows you to adjust camera settings that affect the characteristics of future images you capture with your camera. You can select from the following options: · Video Record Menu--Allows you to adjust camera settings that affect the characteristics of future video clips you record with your camera. You can select from the following options: · Playback Menu--Allows you to work with images. [. . . ]