User manual HP PAVILION DV9200 MAINTENANCE ET SERVICE GUIDE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP PAVILION DV9200. We hope that this HP PAVILION DV9200 user guide will be useful to you.
Manual abstract: user guide HP PAVILION DV9200MAINTENANCE ET SERVICE GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] Maintenance and Service Guide
HP Pavilion dv9000 and dv9200 Notebook PC
Document Part Number: 417615-004
December 2007
This guide is a troubleshooting reference used for maintaining and servicing the computer. It provides comprehensive information on identifying computer features, components, and spare parts; troubleshooting computer problems; and performing computer disassembly procedures.
© Copyright 2006, 2007 Hewlett-Packard Development Company, L. P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Intel and Core are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. [. . . ] Release the ZIF connector 1 to which the keyboard cable is connected and disconnect the keyboard cable 2 from the system board.
Disconnecting the Keyboard Cable
11. Reverse the above procedure to install the keyboard.
530
Maintenance and Service Guide
Removal and Replacement Procedures
5. 12
Speaker Assembly
Speaker Assembly Spare Part Number Information
Speaker assembly 432994-001
1. Remove the the wireless antenna cables and microphone cable from the clips 2 in the speaker assembly.
Releasing the Speaker Assembly
Maintenance and Service Guide
531
Removal and Replacement Procedures
6. Remove the two black Phillips PM2. 5×5. 0 screws 1 that secure the speaker assembly to the computer. Remove the speaker assembly 2.
Removing the Speaker Assembly
Reverse the above procedure to install the speaker assembly.
532
Maintenance and Service Guide
Removal and Replacement Procedures
5. 13
Power Button Board
Power Button Board Spare Part Number Information
Power button board (includes power button board cable) 432987-001
1. Disconnect the following cables from the power button board: 1 Display lid switch module cable 2 Microphone cable 3 Speaker assembly cable 5. Release the ZIF connector 4 to which the power button board cable is connected and disconnect the cable 5.
Disconnecting the Power Button Board Cables
Maintenance and Service Guide
533
Removal and Replacement Procedures
6. Remove the silver Phillips PM2. 5×5. 0 screw 1 that secures the power button board to the computer. Remove the power button board 2.
Removing the Power Button Board
Reverse the above procedure to install the power button board.
534
Maintenance and Service Guide
Removal and Replacement Procedures
5. 14
Display Assembly
Display Assembly Spare Part Number Information
For use with full-featured computer models (includes camera, camera cable, and microphones) 17. 0-inch, SXGA+, TFT Single Lamp with BrightView 17. 0-inch, WXGA+, TFT Single Lamp with BrightView 17. 0-inch, WXGA+, TFT Dual Lamp with BrightView For use with de-featured computer models (includes microphones) 17. 0-inch, SXGA+, TFT Single Lamp with BrightView 17. 0-inch, WXGA+, TFT Single Lamp with BrightView 17. 0-inch, WXGA+, TFT Dual Lamp with BrightView
432947-001 432946-001 432948-001
432950-001 432949-001 432951-001
1. Prepare the computer for disassembly (Section 5. 3) and remove the following components:
Memory module compartment cover (Section 5. 8) Switch cover (Section 5. 10) Keyboard (Section 5. 11) Speaker assembly (Section 5. 12)
Maintenance and Service Guide
535
Removal and Replacement Procedures
2. Remove the two Phillips PM2. 5×8. 0 screws that secure the display assembly to the computer.
Removing the Display Assembly Screws
536
Maintenance and Service Guide
Removal and Replacement Procedures
5. Disconnect the display cable 1 from the system board and the microphone cable 2 from the power button board. Remove the wireless antenna cables and the camera cable from the clips 3 in the top cover. Disconnect the camera cable 4 from the system board.
Disconnecting the Display Cables
Maintenance and Service Guide
537
Removal and Replacement Procedures
Ä
CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components.
10. Remove the two Phillips PM2. 5×8. 0 screws 1 and the two silver Phillips PM2. 5×5. 0 screws 2 that secure the display assembly to the computer. Remove the display assembly 3.
Removing the Display Assembly
538
Maintenance and Service Guide
Removal and Replacement Procedures
12. Remove the following: 1 Three rubber screw covers on the display bezel top edge 2 Two rubber screw covers on the display bezel bottom edge 3 Five Phillips PM2. 5×8. 0 screws rubber screw covers are included The displayspare part number 432967-001. in the Display Screw Kit,
Removing the Display Bezel Screws
Maintenance and Service Guide
539
Removal and Replacement Procedures
Display Assembly Subcomponents Spare Part Number Information
Display bezels For use with Dual Lamp display panels with camera For use with Dual Lamp display panels without camera For use with Single Lamp display panels with camera For use with Single Lamp display panels without camera 432956-001 436068-001 432955-001 436067-001
13. Flex the inside edges of the left and right sides 1 and the top and bottom sides 2 of the display bezel until the bezel disengages from the display enclosure. Remove the display bezel 3.
Removing the Display Bezel
540
Maintenance and Service Guide
Removal and Replacement Procedures
Display Assembly Subcomponents Spare Part Number Information
Camera module 432960-001
secured to the The camera module isApply removal display enclosure byofathe 2-sided adhesive pad. Disconnect the camera cable 2 from the camera module.
Removing the Camera Module
Maintenance and Service Guide
541
Removal and Replacement Procedures
Display Assembly Subcomponents Spare Part Number Information
Display inverters For use with Dual Lamp display panels For use with Single Lamp display panels 432959-001 431391-001
17. [. . . ] Slide the backlight out of the backlight frame.
Removing the Backlight
C12
Maintenance and Service Guide
Display Component Recycling
19. Release the tape 4 that secures the LCD panel to the LCD rear panel.
Releasing the LCD Panel
Maintenance and Service Guide
C13
Display Component Recycling
23. Recycle the backlight and LCD panel.
C14
Maintenance and Service Guide
D
Connector Pin Assignments
Table E-1 Universal Serial Bus
Pin 1 2
Signal +5 VDC Data
Pin 3 4
Signal Data + Ground
Maintenance and Service Guide
D1
Connector Pin Assignments
Table E-2 RJ-45 (Network)
Pin 1 2 3 4
Signal Transmit + Transmit Receive + Unused
Pin 5 6 7 8
Signal Unused Receive Unused Unused
D2
Maintenance and Service Guide
Connector Pin Assignments
Table E-3 S-Video-Out
Pin 1 2 3 4
Signal TV-Ground TV-CVBS TV-Ground TV-Ground
Pin 5 6 7
Signal TV-CD TV-Ground TV-YD
Maintenance and Service Guide
D3
Connector Pin Assignments
Table E-4 External Monitor
Pin 1 2 3 4 5 6 7 8
Signal Red analog Green analog Blue analog Not connected Ground Ground analog Ground analog Ground analog
Pin 9 10 11 12 13 14 15
Signal +5 VDC Ground Monitor detect DDC 2B data Horizontal sync Vertical sync DDC 2B clock
D4
Maintenance and Service Guide
Connector Pin Assignments
Table E-5 RJ-11 (Modem)
Pin 1 2 3
Signal Unused Tip Ring
Pin 4 5 6
Signal Unused Unused Unused
Maintenance and Service Guide
D5
Connector Pin Assignments
Table E-6 Audio-In (Microphone)
Pin 1 2
Signal Audio signal in Audio signal in
Pin 3
Signal Ground
Table E-7 Audio-Out (Headphone)
Pin 1 2
Signal Audio out, left channel Audio out, right channel
Pin 3
Signal Ground
D6
Maintenance and Service Guide
E
Power Cord Set Requirements
3-Conductor Power Cord Set
The wide range input feature of the computer permits it to operate from any line voltage from 100 to 120 or 220 to 240 volts AC. The power cord set included with the computer meets the requirements for use in the country or region where the equipment is purchased. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HP PAVILION DV9200
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP PAVILION DV9200 will begin.