User manual HP JETDIRECT PN1050 SETUP GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP JETDIRECT PN1050. We hope that this HP JETDIRECT PN1050 user guide will be useful to you.


HP JETDIRECT PN1050 SETUP GUIDE: Download the complete user guide (327 Ko)

You may also download the following manuals related to this product:

   HP JETDIRECT PN1050 (713 ko)
   HP JETDIRECT PN1050 GUIDE DE L'ADSTRATEUR (1085 ko)
   HP JETDIRECT PN1050 GUIDA DI INSTALLAZIONE (430 ko)
   HP JETDIRECT PN1050 PÓSTER DE INSTALACIÓN (829 ko)

Manual abstract: user guide HP JETDIRECT PN1050SETUP GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] Installing the HP Jetdirect Module What's in the Box?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setting Up the Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connecting the Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Mounting the Module (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The attachment strips separate to allow you to remove the module temporarily. Decide where to mount the server module on the projector or other surface: Make sure the mounting surface is flat, smooth, and clean. Make sure the cables from the module do not interfere with controls or access panels on the projector. 2. Attach the strip along the top or bottom edge of the label on the bottom of the server module. Press firmly to get full adhesion. Note Do not cover the module's serial number. 4. Attach the other strip to the opposite edge of the label as described above. Clean the projector or other surface where you intend to mount the module. Installing the HP Jetdirect Module 8 6. Peel the backing paper from the exposed sides of the two attachment strips. Press the module firmly onto the mounting surface so that the attachment strips adhere properly. To remove the module, gently pull it away from its mounting surface so that the halves of the attachment strips separate. To reattach the module, press it back into place so that the strips reattach. Note As an alternative, you can mount the module to a wall or other solid surface using the two keyhole slots in the bottom of the module. Insert two screws into the surface 33 mm (1­5/16 in) apart, then slide the keyhole slots over the heads of the screws. Installing the HP Jetdirect Module 9 Finding the Network Address Use the HP projector's on-screen menu to find the network address assigned to the server module and projector: 1. Open the on-screen menu by pressing the enter or menu button on the projector or its remote control. Go to the Help screen and find the IP address, which consists of four numbers separated by dots, such as 10. 2. 3. 4. Installing the HP Jetdirect Module 10 3 Managing HP Projectors Configuring the Module and Projector You can use the server module to configure and monitor the projector from a remote location on the network. Using your computer, you can perform tasks such as these: Configure the server module's network settings. Receive email notifications when certain conditions or events occur on the projector. Set security options to require passwords, encrypt data, and control access. Upgrade the firmware on the projector and server module. For complete information about managing projectors, see the Administrator's Guide on the Documentation CD. Using a Web Browser Each projector server module contains an embedded Web server, which acts as a Web site from which you can remotely configure various settings on the the server module and projector and check their status. On the projector, open the on-screen menu, go to the Help menu, and note the IP address shown on the main menu screen. The address consists of four numbers separated by dots, such as 10. 2. 3. 4. On a networked computer, open an internet browser, enter the IP address of the projector in the URL bar (for example, type 10. 2. 3. 4 or http://10. 2. 3. 4), and press the Enter key. 11 3. Go to the location in the Web interface that contains the information you need or the setting you want to change. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this device does cause interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Connect the device into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HP JETDIRECT PN1050




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP JETDIRECT PN1050 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.