User manual HP IPAQ H6300 POCKET PC

[. . . ] User's Guide HP iPAQ Pocket PC h6300 Series Document Part Number: 353283-001 June 2004 2004 Hewlett-Packard Development Company, L. P. Microsoft, Windows, the Windows logo, Outlook, and ActiveSync are trademarks of Microsoft Corporation in the U. S. HP iPAQ Pocket PC h6300 Series is Powered by Microsoft Windows MobileTM 2003 Software for Pocket PC. SD Logo is a trademark of Secure Digital. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. [. . . ] Tap Next. NOTE: If you selected PPTP in the previous screen, then skip the following step. If you selected IPSec/L2TP on the previous screen, tap the type of authentication. If you select A pre-shared key, enter the key provided by your network administrator, then tap Next. Enter the user name, password, and domain name provided by your network administrator. NOTE: If a domain name was not provided, you may be able to connect without entering one. To change advanced settings, tap the Advanced button. NOTE: You will not need to change advanced settings unless: The server to which you are connecting does not use dynamically-assigned IP addresses and you need to enter your TCP/IP settings, or You need to change server DNS or WINS settings. 12. Tap the Finish button. Starting VPN Server Connections To start a connection through a VPN server, be sure Wi-Fi is powered on, then select the VPN network. Your Pocket PC will automatically begin connecting. User's Guide 717 Using Wi-Fi Setting Up Proxy Server Settings If you are connected to your ISP or private network during synchronization, your Pocket PC should download proper proxy settings from your computer. If these settings are not on your computer or need to be changed, you will need to set them up manually. Contact your ISP or network administrator for the proxy server name, server type, port, type of Socks protocol used, and your user name and password. From the Start menu, tap Settings > Connections tab > Connections > Tasks tab. Under My Work Network, tap Edit my proxy server > Proxy Settings tab. Tap the This network connects to the Internet and This network uses a proxy server to connect to the Internet checkboxes. If you need to change port number or proxy server type settings, tap the Advanced button and change the desired settings. Tap OK. WLAN Security Protocol Utilities Your HP iPAQ Pocket PC supports the IEEE 802. 1X standard for wireless encryption for customers whose network supports this feature. Contact your company's IT Administrator to set up the following features that are installed on your Pocket PC. 718 User's Guide Using Wi-Fi TTLS Tunnelled Transport Layer Security (TTLS) supports secure user name/password and mutual authentication. It provides highly secure transmissions allowing the client to authenticate a certificate installed on the server and then forms a secure connection between client and server. The server authenticates the client over the secured connection when the user provides a user name and password. 802. 1X Certificate Enroller This utility allows you to request a user certificate from a certificate server. Once the certificate has been received and stored on your iPAQ Pocket PC, you can access the network using one of the 802. 1X protocols. Refer to "Manually Entering New Network Settings" earlier in this chapter for information on selecting one of these protocols. Be sure your Pocket PC has an ActiveSync connection to a computer on the same network as the certificate server. Tap Start > Settings > System tab > Certificates > Enroll. Complete the on-screen certificate request form by entering your name, password, and the server to retrieve the certificate from. [. . . ] However, your HP wireless phone has been designed so that it does not exceed the emission limits for exposure to radio frequency energy that are set by the Federal Communications Commission of the U. S. These limits are part of comprehensive guidelines and establish permitted levels of RF A8 User's Guide Regulatory Notices energy for the general population. The guidelines are based on the safety standards previously set by both the United States and international standards: This equipment under test has been shown to be capable of compliance for localized Specific Absorption Rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Standard C95. 1-1992 and had been tested in accordance with measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001) and IEEE Standard 1528-200X (Draft 6. 5, January 2002). The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. [. . . ]