User manual HP G5350 UPGRADING AND SERVICING GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP G5350. We hope that this HP G5350 user guide will be useful to you.


HP G5350 UPGRADING AND SERVICING GUIDE: Download the complete user guide (7707 Ko)

Manual abstract: user guide HP G5350UPGRADING AND SERVICING GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of HP. Box 4010 Cupertino, CA 95015-4010 USA Copyright © 2005­2007 Hewlett-Packard Development Company, L. P. This product incorporates copyright protection technology that is protected by U. S. [. . . ] The exclamation point means there is a device conflict or problem with the device. Exclamation points do not always appear when a device is not working properly. 4 If you have removed a hardware device, and the device driver is listed in the Device Manager, this may be causing the device conflict. To uninstall the old driver so that the new device driver works properly, right-click the device, click Uninstall, and then click OK. 7 Click the General tab to see whether your device is enabled and working properly. If it is available, click the Troubleshoot button, and follow the onscreen instructions in the device troubleshooter wizard. Click the Windows Start Button, click the Arrow button next to the Lock button, and then click Restart. 12 Troubleshooting and Maintenance Guide Internet Access Symptom I cannot connect to the Internet. Possible solution Verify Internet settings, or contact your Internet Service Provider (ISP) for assistance. Verify that you are using the proper cables for your Internet connection type. Your computer may have a modem and an Ethernet network adapter (also called a network interface card, or NIC). Do not plug a network cable into a telephone service line; doing so may damage the NIC. Possible solution Turn off the computer by using the mouse, reconnect the keyboard to the back of your computer, and then turn on your computer. Use the Print menu item in the program (usually located on the File menu). Check for these problems: Ensure the mouse and keyboard are within range of the receiver. Turn the devices over, take off the battery cover, remove the old batteries, and insert new alkaline batteries. Ensure the mouse is not in suspend mode, which occurs after 20 minutes of inactivity. Resynchronize the keyboard and mouse to the receiver: 1 Plug the receiver into a USB port on the computer. 2 Push the Connect button (a) on the receiver (which is also the LED light), and hold it for 5 to 10 seconds until the blue light starts to flash. a 3 Check that the mouse is on, and push and hold the Connect button (b) on the underside of the mouse until the blue LED on the receiver stops flashing. b NOTE: The receiver connection session times out after 60 seconds. To ensure the connection was established, and that the receiver did not time out instead, move the mouse and check for response. Troubleshooting Computer Problems 15 Keyboard and Mouse (continued) Symptom Wireless keyboard or mouse does not work or is not detected. (continued) Possible solution After the mouse connection is established, repeat the procedure with the keyboard: 1 Push the Connect button on the receiver, and hold it for 5 to 10 seconds until the blue light starts to flash. 2 Push and hold the Connect button (c) on the underside of the keyboard until the blue LED on the receiver stops flashing. c Refer to the documentation that came with the keyboard and mouse. [. . . ] To run the system recovery program using recovery discs: 1 If the computer is working, create a backup CD or DVD containing all the data files you want to save. When you are done, remove the backup disc from the drive tray. CAUTION: All data on the hard disk drive will be deleted. You will lose data if it is not backed up. System recovery at system startup If Windows Vista is not responding, but the computer is working, use these steps to perform a system recovery: NOTE: System recovery deletes all data and programs that you created or installed after purchase. Therefore, ensure you back up any data that you want to keep onto a removable disc. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HP G5350




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP G5350 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.