User manual HP ENVY 13-1050EA

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP ENVY 13-1050EA. We hope that this HP ENVY 13-1050EA user guide will be useful to you.


HP ENVY 13-1050EA : Download the complete user guide (1947 Ko)

You may also download the following manuals related to this product:

   HP ENVY 13-1050EA (3514 ko)
   HP ENVY 13-1050EA (3272 ko)
   HP ENVY 13-1050EA (3264 ko)
   HP ENVY 13-1050EA (3289 ko)
   HP ENVY 13-1050EA (3290 ko)
   HP ENVY 13-1050EA (3280 ko)
   HP ENVY 13-1050EA (3253 ko)
   HP ENVY 13-1050EA (3576 ko)
   HP ENVY 13-1050EA (3278 ko)
   HP ENVY 13-1050EA (3257 ko)

Manual abstract: user guide HP ENVY 13-1050EA

Detailed instructions for use are in the User's Guide.

[. . . ] HP ENVY 13 Maintenance and Service Guide Document Part Number: 530626-001 September 2009 This guide is a troubleshooting reference used for maintaining and servicing the computer. It provides comprehensive information on identifying computer features, components, and spare parts; troubleshooting computer problems; and performing computer disassembly procedures. © Copyright 2009 Hewlett-Packard Development Company, L. P. ATI and ATI Mobility Radeon are trademarks of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. [. . . ] Release the power connector 3 from the clip built into the base enclosure. Remove the wireless antenna cables from the rubber clips 5 built into the system board. 6. Remove the five Phillips PM2. 0×4. 0 screws 1 and the two Phillips PM2. 0×6. 0 screws 2 that secure the system board to the base enclosure. Maintenance and Service Guide 4­21 Removal and replacement procedures 7. Remove the system board 2 by sliding it up and to the left at an angle. Reverse this procedure to install the system board. 4­22 Maintenance and Service Guide Removal and replacement procedures Power connector cable Description Power connector cable Spare part number 538338-001 Before removing the power connector cable, follow these steps: 1. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. Remove the power connector cable 2. Reverse this procedure to install the power connector cable. Maintenance and Service Guide 4­23 Removal and replacement procedures SATA cable Description SATA cable Spare part number 538347-001 Before removing the SATA cable, follow these steps: 1. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. Remove the SATA cable 2. Reverse this procedure to install the SATA cable. 4­24 Maintenance and Service Guide Removal and replacement procedures RTC battery Description RTC battery (includes double-sided tape) Spare part number 538345-001 Before removing the RTC battery, follow these steps: 1. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. (The RTC battery is attached to the system board with double-sided tape. ) 3. Reverse this procedure to install the RTC battery. Maintenance and Service Guide 4­25 Removal and replacement procedures Memory module Description 4096-MB memory module (1066-MHz, DDR3) 2048-MB memory module (1066-MHz, DDR3) 1024-MB memory module (1066-MHz, DDR3) Spare part number 538323-001 538322-001 538321-001 Before removing the memory module, follow these steps: 1. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. Pull away the retention clips 1 on each side of the memory module to release the memory module. (The memory module tilts up. ) Ä CAUTION: To prevent damage to the memory module, hold it by the edges only. Grasp the edge of the memory module 2, and gently pull it out of the memory module slot. are designed with a notch 3 to prevent incorrect insertion into the memory module Reverse this procedure to install a memory module. 4­26 Maintenance and Service Guide Removal and replacement procedures Fan/heat sink assembly Description Fan/heat sink assembly (includes replacement thermal material) Spare part number 538340-001 Before removing the fan/heat sink assembly, follow these steps: 1. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. Turn the system board upside down, with the rear toward you. Maintenance and Service Guide 4­27 Removal and replacement procedures 3. Following the 1, 2, 3, 4, 5, 6 sequence stamped into the fan/heat sink assembly, remove the six Phillips PM1. 5×3. 0 screws 2 that secure the fan/heat sink assembly to the system board. the thermal material located Due to the adhesive qualityitofmay be necessary to move thebetween the fan/heat sink assembly and to system board components, fan/heat sink assembly from side to side detach it. material must be thoroughly cleaned from The thermaltime the fan/heat sink assembly is removed:the surfaces of the fan/heat sink assembly and the system board each Thermal paste is used on the processor 1 and the fan/heat sink assembly section 2 that services it. Thermal pads are used on the Northbridge chip 3 and the fan/heat sink assembly section 4 that services it. Thermal pads are used on the video chip 5 and the fan/heat sink assembly section 6 that services it. [. . . ] CAUTION: The procedures in this chapter can result in damage to display components. The only components intended for recycling purposes are the liquid crystal display (LCD) panel and the backlight. When you remove these components, handle them carefully. contains Materials Disposal. Theatbacklight in the displayofassembly of thisbeHP productbecause ofmercury, which might require special handling end-of-life. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HP ENVY 13-1050EA




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP ENVY 13-1050EA will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.