User manual HITACHI POWER TOOLS VRY38 ELECTRIC TOOL PARTS LIST

[. . . ] If you should lose the fuse cover, please contact your nearest Sony service station. Charging the Battery Pack (See illustration A) 1 2 Connect the power cord to a wall outlet. 1 WARNING AC power cord must be changed only at the qualified service shop. [. . . ] If you are unable to insert the plug fully into the outlet, contact your dealer. tHIS APPARATUS COMPLIES WITH THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS SET OUT IN RADIO INTERFERENCE REGULATIONS. 3 Align the right side of the battery pack with the line on the AC power adaptor, then while pressing the battery pack, slide it in the direction of the arrow. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Nombre del producto: Adaptador de alimentación de ca Modelo: VRY38 ELECTRIC TOOL PARTS LIST/V17 WARNING To prevent shock hazard, do not insert the plug cut off from the mains lead into a socket outlet. To remove the battery pack Slide the battery pack in the opposite direction of the arrow. A 1 2 This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The Graphical Symbols with Supplemental Marking is located on the bottom of the unit. € The POWER lamp will remain lit for a while even if the unit is unplugged after use. € If the POWER lamp does not light, set the selector to VTR and disconnect the power cord. After about one minute, reconnect the power cord and set the selector to VTR again. This will damage the cord and may cause a fire or an electrical shock. € Be sure that nothing metallic comes into contact with the metal parts of the connecting plate. € While the unit is in use, particularly during charging, keep it away from AM receivers and video equipment because it will disturb AM reception or video operation. € Do not place the unit in locations where it is; -Extremely hot or cold -Dusty or dirty -Very humid -Vibrating If any difficulty should arise, unplug the unit and contact your nearest Sony dealer. € A negligible amount of electric current will flow into the AC power adaptor as long as the AC power adaptor is plugged into the wall outlet. € Do not operate the unit with a damaged cord or if it has been dropped or damaged. [. . . ] € Do not operate the unit with a damaged cord or if it has been dropped or damaged. 1 A in charge mode Application Sony Nickel Cadmium (Ni-Cd) type battery pack except NP-22H Operating temperature 0 °C to +40 °C (+32 °F to +104 °F) Storage temperature -20 °C to +60 °C (-4 °F to +140 °F ) Dimensions Approx. This mark indicates that this product is a genuine accessory for Sony video products. [. . . ]