User manual HERO GOPRO 3

[. . . ] Camera will power off automatically in 60 seconds, or you can push and hold the power button to turn off the camera. to Shoot Triple Shot Sequence Photos Turn on camera by pressing POWER/MODE button. Press POWER/MODE button again once and you will see the triple shot icon on the front LCD status screen. [. . . ] MAC USERS: Simply plug the camera into your MAC with the included USB cable and the MAC OS will recognize the camera as either a mass storage device or external hard drive. You can also use iPhoto to import photos from the camera onto your MAC. Setting the Camera Press the POWER/MODE button repeatedly until you see the SET icon Press the SHUTTER button to enter settings mode. in SET mode , you can change the HOLD FUNCTION , PAL/NTSC , FREQUENCY , and AUTO POWER OFF settings. Press the POWER/MODE button to cycle through these options once in SET mode. HOLD FUNCTION SETTING HLO ­ This setting means "hold function on" and it will turn on the camera in the last mode you used it in when the camera was turned off. HLF - This setting means "hold function off" and it will turn the camera on into the default "photo mode" each time camera is turned on. Press the shutter button to cycle between choices, then press the POWER/MODE button to save it and proceed to the next setting. POWER FREQUENCY SETTING This setting can affect the quality of indoor photos if not set to your region's power frequency. in the North America , Central and South America , please set your frequency to 60Hz. If you are in Europe, Japan, Oceania, and Asia, please set your frequency to 50Hz. Press the shutter button to cycle between choices, then press the POWER/MODE button to save it and proceed to the next setting. Choose PAL if viewing on a TV outside of North America or if viewing on a PAL TV in any region. Press the shutter button to cycle between choices, then press the POWER/MODE button to save it and proceed to the next setting. HI/LO SOUND RECORDING (VIDEO) The camera has two settings for video sound recording levels, HI and LO. HI setting is good for recording during normal wrist camera use and during any non-high vibration activity. LO setting is good for recording good sound and video during high vibration activities where the camera might be strapped to bike handlebars, mounted on a car, motorcycle, shifter kart, or similar high vibration device. If you hear sound breakup during your filming, choose the LO setting for better sound. [. . . ] bATTERY TIPS: Use rechargeable NiMH batteries for maximum battery life. Use lithium AAA batteries for maximum battery life in very cold temperatures. COLD WEATHER TIPS: It is very important to use lithium AAA batteries or NiMH batteries in cold weather as they are not affected by cold temperature. [. . . ]