User manual HAWKING WA739P

[. . . ] WA739P · Wireless Access Point with 3-Port Wireless Print Server or · 3-Port Wireless Print Server User's Guide Web: http//www. hawkingtech. com Email: Techsupport@hawkingtech. com Copyright 2002 Hawking Technologies, All rights reserved. Trademarks & Copyright Windows 95/98/ME and Windows NT/2000/XP are registered trademarks of Microsoft Corp. All other brands and product names are trademarks of their respective companies. No part of this publication may be reproduced in any form or by any means or used to make any derivative (such as translation, transformation or adaptation) without the express written consent of the manufacturer as stipulated by the United States Copyright Act of 1976. FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] 6 - 17 Network Print Monitor Installing Wireless Print Server on NetWare 4. x/5. x Due to its architecture and functionality, the Wireless Print Server must work under NetWare 4. x/5. x NDS Bindery Emulation. When you install the NetWare file server for the first time, by default, the installation program will automatically set up the Bindery Emulation function for you by adding "SET BINDERY CONTEXT =" in the AUTOEXEC. NCF file. By default, the bindery context will only be set on your organization (O) object. If you have ever modified this line, or if you have ever added any organization units (OU) to your NDS tree after the NetWare system was installed, please read the following section before you install the Wireless Print Server. For the purpose of illustration, we assume the NDS tress structure is as follows: [ROOT] (O)ABC (OU)ABC-USA Admin FileServer-1 (OU) Tech (OU)Sales Installation Procedure 1. At your file server console, type "load install". 6 - 18 Network Print Monitor 2. Add or Modify the "SET BINDERY CONTEXT =" line to include the NDS organization (O) and all organization unit (OU) objects where users are located. For example: SET BINDERY CONTEXT = O=ABC; OU=SALES. OU=ABC-USA. O=ABC; OU=TECH. OU=ABC-USA. O=ABC ; When done, save the new AUTOEXEC. NCF file. Please restart your NetWare file server in order for new settings to take effect immediately. Next, please refer to "Auto Setup" section in this chapter to finish installing your Wireless Print Server. Log into your NetWare file server as a Supervisor (Admin. ) or equivalent via a Bindery connection. Run NetWare's PCONSOLE and add users to the "Queue Users" list. From your NetWare client computer, such as Windows 95/98/Me, create a printer that is connected (redirected) to the NetWare print queue serviced by the Wireless Print Server. 5. 6. 9. Note: Please refer to NetWare's Wireless Print Server/Services manuals for detailed PCONSOLE commands. Click Next to configure SNMP Protocol or Click Save & Restart to reboot your Wireless Print Server. SNMP Setup TCP/IP networks use a standard management protocol called Simple Network Management Protocol (SNMP). SNMP is widely used in the industry as a solution for remote network management and monitoring of networking devices. SNMP actually includes a 6 - 19 Network Print Monitor protocol, a database structure specification, and a set of database objects. The database objects are contained in a standard database called Management Information Base (MIB) that is stored on the networking device called SNMP agent. The Wireless Print Server's SNMP implementation runs in a TCP/IP environment. A host on the network running Network Management System (NMS) software can access the Wireless Print Server device by reading and writing the MIB objects stored in the device. The Network Management Systems are available from many third-party vendors, such as Hewlett-Packard's OpenView. When accessing (traversing) MIB objects in the Wireless Print Server using NMS software called SNMP manager, you need to provide a community name in each SNMP request for authentication purpose. [. . . ] Possible explanation and solution A printer driver is missing or is incompatible with that printer. Using a print driver that is not specific for the printer can cause printing errors. If these printer drivers are not available to you, please contact your printer manufacturer. Question C The upgrading process indication bar stops and does not seem to proceed again while upgrading the Wireless Print Server. Check the network cabling, especially from the workstation running the PSAdmin to the Wireless Print Server unit. [. . . ]