User manual HAWKING NET-TALK HNT1 DOCUMENT

[. . . ] Trademarks & Copyright MSN Messenger, Windows 95/98/ME and Windows NT/2000/XP are registered trademarks of Microsoft Corp. All other brands and product names are trademarks of their respective companies. No part of this publication may be reproduced in any form or by any means or used to make any derivative (such as translation, transformation or adaptation) without the express written consent of the manufacturer as stipulated by the United States Copyright Act of 1976. Disclaimer Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage. FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] In this situation, the USB Phone will take over your current sound and speakers' settings. To continue to use your original soundcard and speakers for standard audio playback, you can manually specify a preferred audio playback device (e. g. , your sound card or USB speaker) while at the same time, continue to use the USB Phone as the default audio input/output device in Skype®. To specify a sound device for audio playback in Windows, go to Control Panel > Sounds and Audio Devices (or Sounds and Multimedia) > Audio and select a desired device in the Sound playback section. 12 Hawking HNT1 Net-TalkTM USB Internet Phone Calling a Skype® User Prerequisites To call a Skype user, launch Skype® and log in. Once you have added Skype® user(s) to your contact list, you can start making calls to a specific user. For additional instructions on how to use Skype® and a detailed description of its functions, please go to Skype's homepage (http://www. skype. com). Loading the Contact List onto the LCD Display 1. Press the Right Directional Menu key (Contact List key) to load the Skype contact list. The top-right icon means online while indicates the online status of the contact. Use the Up / Down Directional Menu keypad to select the desired contact. (To exit the contact list, press the Contact List key again or press the key. To call the current contact, just press the connection, the screen will display the following with the contact's name: 4. To end the call, press . Using the Contact List on Skype® window 1. Press the Skype On key to open the Skype window (if not open) and switch to the Contacts tab. You can use the computer's mouse or the Up / Down Directional Menu keypad on the USB phone to scroll through the contact list. To end the call, press 13 . HNT1 Internet Phone User's Manual Speed Dialing 1. In Skype window, go to the Contacts tab and select your desired contact. Assign a number (from 0-99) as a speed dial number using your keyboard. 3. Press the key to call the number. Note: If you want to use this function, you must have set up a SkypeOut account first. Check the Skype website for sign-up rates and credit information. 14 Hawking HNT1 Net-TalkTM USB Internet Phone Answering a Call On an incoming call, the USB phone will ring and the LCD backlight will flash with the caller ID displayed. Press the key to answer the call. To end a call, press the key. Ending / Rejecting a Call To end or reject a call, press the key. Loading Calling List Log The Calling List keeps a log record of your most recent calls made or received from other users. To access this information via handset, you need to access the Calling List phone menu. Pressing the Left Directional Menu key (Calling List key) allows you to load the call log list. You can press the Calling List key repeatedly to switch between outgoing call list ( ), incoming call list ( , including missed and rejected calls) and main screen. [. . . ] Select the sound card or USB speaker as the sound playback device. Q4. After I connect the USB phone, I cannot play music from my USB speaker. When the USB phone is connected for the first time, Windows will reset its audio settings to use the USB phone as the over all audio in/out device. In this situation, you can manually specify a preferred music playback device, e. g. , your sound card or USB speaker while at the same time still use the USB phone as audio in/out device in Skype. [. . . ]