User manual HAWKING HAI6SD DOCUMENT

[. . . ] LIMITED WARRANTY Hawking Technology guarantees that every HOWABN1Hi-Gain Wireless-300N Hi-Gain Outdoor Wireless-N Access Point/Bridge is free from physical defects in material and workmanship under normal use for one (1) year from the date of purchase. If the product proves defective during this one-year warranty period, call Hawking Customer Service in order to obtain a Return Authorization number. When returning a product, mark the Return Authorization number clearly on the outside of the package and include your original proof of purchase. IN NO EVENT SHALL HAWKING TECHNOLOGY'S LIABILTY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE OR ITS DOCUMENTATION. [. . . ] For detailed descriptions of the function, please refer to Section 2-4-1-1. The channel number must be same with another wireless Hi-Gain Outdoor Wireless-N Access Point you wish to connect Click `Show Active Clients' button and a new popup window will appear which contains the information about all wireless clients connected to this Hi-Gain Outdoor Wireless-N Access Point. You can click `Refresh' button in popup window to keep information up-to-date. Please input the MAC address of the wireless Hi-Gain Outdoor Wireless-N Access Point you wish to connect 42 MAIN ESSID Multiple ESSID Channel Number Associated Clients MAC address 1-4 Set Security Click this button to select an encryption mode for this wireless link, a new popup window will appear. Please refer to Section 2-7 for detailed descriptions. After you finish with setting, please click `Apply', and the following message will be displayed: When you see this message, the settings you made are successfully saved. You can click `Go Back' button to back to previous page and continue on other setting items, or click `Apply' button to restart the wireless Hi-Gain Outdoor Wireless-N Access Point and the changes will take effect after about 30 seconds. 2-4-6 Universal Repeater In this mode, the Hi-Gain Outdoor Wireless-N Access Point can act as a wireless repeater. It will use the Bridging function to connect to the source access point and use the Access Point function to rebroadcast the signal. NOTE: For Repeater Mode, this Hi-Gain Outdoor Wireless-N Access Point will demodulate the received signal, checking if this signal is noise for the operating network then have the signal modulated and amplified again. The output power of this mode is the same as that of WDS and normal AP mode. 43 Here are descriptions of every setup item: Band Please select the wireless band you wish to use. By selecting different band setting, you'll be able to allow or deny the wireless client of a certain band. If you select 2. 4GHz (B), 2. 4GHz (N), or 2. 4GHz (G), only wireless clients using the wireless band you select (802. 11b, 802. 11 Draft-N, or 802. 11g) will be able to connect to this Hi-Gain Outdoor Wireless-N Access Point. SSID: Displays the SSID (ESSID) of this Hi-Gain Outdoor Wireless-N Access Point. Authentication Mode: The wireless security authentication mode of this Hi-Gain Outdoor Wireless-N Access Point will be displayed here. If you don't enable security function of the Hi-Gain Outdoor Wireless-N Access Point before WPS is activated, the Hi-Gain Outdoor Wireless-N Access Point will auto set the security to WPA (AES) and generate a set of passphrase key for WPS connection. Passphrase Key: Displays the WPA passphrase here, all characters will be replaced by asterisk for security reason. If encryption is not set on this Hi-Gain Outdoor Wireless-N Access Point, nothing 49 Config Mode Start PBC Start PIN will be displayed here. There are `Registrar' and `Enrollee' modes for the WPS connection. When `Registrar' is enabled, the wireless clients will follow the Hi-Gain Outdoor Wireless-N Access Point's wireless settings for WPS connection. When `Enrolle' mode is enabled, the Hi-Gain Outdoor Wireless-N Access Point will follow the wireless settings of wireless client for WPS connection. Click `Start PBC' to start Push-Button style WPS setup procedure. This Hi-Gain Outdoor Wireless-N Access Point will wait for WPS requests from wireless clients for 2 minutes. The `WLAN' LED on the Hi-Gain Outdoor Wireless-N Access Point will be steady on for 2 minutes when this Hi-Gain Outdoor Wireless-N Access Point is waiting for incoming WPS request. [. . . ] The IP address is a 32-bit binary pattern, which can be represented as four cascaded decimal numbers separated by ". ": aaa. aaa. aaa. aaa, where each "aaa" can be anything from 000 to 255, or as four cascaded binary numbers separated by ". ": 86 bbbbbbbb. bbbbbbbb. bbbbbbbb. bbbbbbbb, where each "b" can either be 0 or 1. A network mask is also a 32-bit binary pattern, and consists of consecutive leading 1's followed by consecutive trailing 0's, such as 11111111. 11111111. 11111111. 00000000. Therefore sometimes a network mask can also be described simply as "x" number of leading 1's. When both are represented side by side in their binary forms, all bits in the IP address that correspond to 1's in the network mask become part of the IP network address, and the remaining bits correspond to the host ID. [. . . ]