User manual HARTAN SKATER XL

[. . . ] For safety reasons, only use Hartan accessories and Pull handle 1 upwards until handle catch 2 has engaged. Folding the pram Turn safety turn-lock 3 inward until the handle's 1 catch has released. We recommend proceeding with caution when folding and unfolding the chassis, and adjusting the backrest, as there is a risk that you do yourself an injury such as jamming your limbs, fingers, etc. Replacement of brake disk and drum brake Press the two push buttons at both sides of the front wheel and remove the front wheel unit. [. . . ] To release the upper-section lock, pull the locking lever 19 downwards until the lever has engaged. If the red safety points can still be seen, the upper-section lock has not yet closed completely. Fall-out protection As an additional protection preventing the baby from falling out of the carriage, secure the hood to the metal back. To do this, join the two grommets 20 to their respective turn-lock fasteners, and the hook lock 21 to the metal ring on the back plate as well. Suitability for your child The Skater X and Skater XL stroller units are designed to carry a child from the age of 6 months, and up to 15kg in weight. The Skater XL carriage unit is designed to carry a child from birth ­ up to the age of 12 months, and up to 9kg in weight. The Skater X stroller is not suitable for children under the age of 6 months except in connection with an appropriate carrycot. Care of the fabric parts Clean soiled fabrics when dry using a clothes-brush or lukewarm water (then use hair dryer). all removable fabric parts may be machine washed in lukewarm water at a gentle setting and reduced agitation , at 30 °C. Dry your carriage with the hood still on in a dry and airy room using a cloth. This prevents marking as well as the underlining fabrics from moist soaking in through the seams. As a guaranteed protection against rain, we recommend that you use our rain cover, which is either included or can be purchased at your dealer. That's why you should park your carriage in the shade whenever possible. You should clean and slightly lubricate the wheel axles at an regular 4-weeks interval. Keep all coated and chrome-plated metal parts in dry condition, and use a finish restorer or chrome paste if necessary. Remove smaller chassis paint damages by means of a touch-up applicator. Wheels: Using pneumatic wheels, make sure they have got enough air in the tire. Whenever possible, do not park carriages using pneumatic tired wheels for a longer period of time on light PVC or linoleum as rubber tires may rub off on the floor covering. 2 YEARS warranty This product is guaranteed for a period of 2 years beginning on the date it is handed over by the dealer. For possible submission of proof, please keep your receipt, the completed warranty card as well as the handover check bearing your signature for the length of the warranty period. These documents must be submitted to qualify for service under the warranty. This product is warranted against defects in materials and workmanship that existed at the time it was handed over. [. . . ] This will be attributed to extraneous causes -- a small hole caused by a pointed object, or pushing the pram about when it has not got enough air in the tire. WHAT TO REMEMBER WHEN BUYING YOUR PRAM Check that your pram is complete when it is handed over and no parts are missing. Check the function of all parts and confirm this by signing the hand-over check. WHAT TO DO IN CASE OF A COMPLAINT Call your dealer, from whom you bought the pram, to file the complaint and to discuss how to handle the matter. [. . . ]