User manual HAICOM HI-406BT-C
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HAICOM HI-406BT-C. We hope that this HAICOM HI-406BT-C user guide will be useful to you.
Manual abstract: user guide HAICOM HI-406BT-C
Detailed instructions for use are in the User's Guide.
[. . . ] HI-406BT-C
Bluetooth GPS receiver with Digital Compass
1
Table of Contents 1. 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Get Connected; Installation Guide 6. 1 Laptop PC Installations . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] As soon as turn on the switch on the right side, the GPS receiver will start to function and search the satellites. Meanwhile, the LED indicator on the right side in front of HI-406BT-C will turned green (stay on - the GPS receiver not get 3D fixed yet) Please make sure place the HI-406BT-C outdoor open space so that it can get the proper satellite signal. After HI-406BT-C gets enough satellite data (lock more than 4 satellites), HI-406BT-C is in 3D fixed and the green light start blinking.
Digital compass Switch
9
Bluetooth GPS Switch
LED indicator color Amber LED off Green (blinking) Green (Stay on) Blue (blinking) Blue (stay on) Red
Status HI-406BT-C battery charging HI-406BT-C battery fully charged GPS in 3D fixed GPS searching more satellite and not in 3D fixed yet Bluetooth searching host device Bluetooth paired and connected HI-406BT-C battery low
10
STEP 5: As soon as turn on the switch on the right side, the Bluetooth will also start to function and searching. The blue light on the left side in front of HI-406BT-C will turned on (Blinking) meaning the Bluetooth is searching the host device and not get paired yet. Please consult the Bluetooth step by step connection guide from this manual on section . After the Bluetooth paired and connected, the blue light will stay on.
STEP 6: Open the mapping software from your mobile device, select the corresponding COM port and start GPS.
STEP 7: Enjoy the state of the art wireless GPS navigation.
11
2. 2 Setting up:
Digital Compass As soon as turn on the switch on the left side, the digital compass will start to function and indicating the north (LED on red) and the south (LED on green) based on the earth magnetic field. Since the HI-406BT-C equipped with 2-axiel digital compass chip, please make sure place the HI-406BT-C on horizontal surfaced and no grater than 30 degree angle. The digital compass or the Bluetooth GPS receiver can work independently or work simultaneously. Even the Bluetooth GPS receiver switch turned off, the compass can work and the HI-406BT-C become a pure digital compass.
12
Notices about the digital compass: Even if HI-406BT-C digital compass functionality is normal, the sensing accuracy may be degraded by the following circumstances: 1. The earth magnetic field can be distorted next to the ferrous material, such as building, bridges, railroads, etc. It can also be influenced by ferromagnetic material, like, next to a speaker. HI-406BT-C digital compass functionality is designed for general-purpose uses and not for specialpurpose uses, such as, aviation, space, traffic devices or medical applications for life support or any devices which can affect human life or injure human body if the device malfunction or degraded. [. . . ] Data rate Transmission Power (Maximum) Hoping Receiving Signal Range Receiver IF Frequency Baseband Crystal OSC Compliant 2400MHz to 2483. 5MHz GFSK, 1Mbps, 0. 5BT Gaussian Asynchronous: 723. 2kbps/57. 6kbps Synchronous: 433. 9kbps/433. 9kbps 4dBm(Class 2) 1600hops/sec, 1MHz channel space -84 to -15dBm 1. 5MHZ center frequency 16MHz Bluetooth Specification v1. 1
Electrical
Main power input Power consumption Backup Power Operation time 5±5%VDC 0. 4W @ 3. 3VDC (Full Power) 1. 5±10%VDC input 9 hours (1000mAh Li-Ion battery)
21
GPS Firmware
Protocol Baud Rate Update Rate Datum NMEA/SiRF Binary 19200 bps 1Hz WGS84
Environmental
Temperature Operating Temperature 10°C to +55°C Storage Temperature 20°C to +65°C Relative Humidity 5% to 95%, non-condensing
LED Indicator
LED 1
Color Blue Flashing Blue Red BT Active Yes No Low Power Yes
LED 2
Color Green Flashing Green Orange GPS Fix Status No Yes Battery Charging Yes
22
6. Get Connected; Installation Guide
6. 1 Laptop PC Installations
Run "My Bluetooth Places" and Double Click the "Find Bluetooth Devices " icon
Double Click "HI-406BT"
23
Double Click "GPS OUTPUT on HI-406BT"
24
Key in pin code: "0000"
Connected
25
6. 2 PDA Installations
Double Click the Bluetooth icon
26
Double click "HI-406BT"
27
Key in pin code: "0000"
Found the host device
28
For Connected with device
Select the correct com port
29
Start GPS, NMEA message inflow
More satellites info
30 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HAICOM HI-406BT-C
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HAICOM HI-406BT-C will begin.