User manual HAICOM HI-202E
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HAICOM HI-202E. We hope that this HAICOM HI-202E user guide will be useful to you.
Manual abstract: user guide HAICOM HI-202E
Detailed instructions for use are in the User's Guide.
[. . . ] GPS applications also include keeping track of where a fleet of trucks, trains, ships or planes are and how fast they are moving; directin gemergency vehicles to the scene of an accident; mapping where a city's assets are located ; and providing precise timing for endeavors that require large-scale coordination.
3
1. HI-202E Series Introductions
HI-202E is a GPS receiver with USB interfaces and built-in active antenna for high sensitivity to tracking signal. HI-202E is well suited to system integration and users who use any kinds LaptopPC. It satisfies a wide variety of applications for car navigation, personal navigation or touring devices, tracking and marine navigation purpose. [. . . ] If the receiver is transported over a large distance across the globe, cold-start automaticlocate sequence is invoked. The first position fix may take up to 50 sec searching the sky for the GPS signal. The acquisition performance can be improved significantly if the host initializes the receiver with a rough estimate of time and user position.
8
As soon as GPS signal is acquired and tracked, the HI-202E will transmit valid navigation information through its serial interface. The navigation data contains following information: · Receiver position in latitude, longitude, and altitude · Receiver velocity · Time · DOP error-magnification factor · GPS signal tracking status The HI-202E will perform 3D navigation when four or more satellites are tracked. When three or fewer satellites are tracked, altitude-hold is enabled using the last computed altitude and 2D navigation mode is entered. With signal blockage or rising and setting of the satellites, where a change in satellite constellation used for position fix occurred, large position error may result. The HI-202E incorporates a proprietary algorithm to compensate the effect of satellite constellation change, and maintains an accurate smooth estimate of the receiver position, velocity, and heading.
9
2. Electrical Characteristics
Items Chipset General GSP3F Frequency C/A code Channels Position Accuracy Velocity Datum Time Default Other Description SiRF StarIII technology L1, 1575. 42 MHz 1. 023 MHz chip rate 20 10 meters, 2D RMS 5 meters 2D RMS, WAAS corrected <5meters(50%), DGPS corrected 0. 1 meters/second 1 microsecond synchronized to GPS time WGS-84 selectable for other Datum 0. 1 sec. , average 1 sec. , average 8 sec. , average 38 sec. , average 42 sec. , average 18, 000 meters (60, 000 feet) max. 20 meters/second3, max.
Acquisition Reacquisition Rate (Open Sky Snap start & Stationary Requirements) Hot start Warm start Cold start Altitude Dynamic Conditions Velocity Acceleration Jerk
Power Dimension Weight
Main power input 5V DC input. Power consumption 0. 38 W (continuous mode) Supply Current 75mA Backup power 3 V Lithium-Ion rechargeable battery 43mm L x 42mm W x 13mm H 23g
10
2. 2 LED INDICATOR
LED flashing 0. 25Hz LED flashing 1Hz Signal Searching Position Fixed
11
SECTION 3 HARDWARE INTERFACE 3. 1 MECHANICAL DIMENSIONS
Unit:mm Top View
69±0. 2 I/O Cable
Build-in patch antenna Lateral View 20±0. 2 I/O Cable Bottom View LED indicator
69±0. 2
I/O Cable CPU Magnetic 73±0. 2
12
3. 2 ONE-PULSE-PER-SECOND (1PPS) OUTPUT The one-pulse-per-second output is provided for
applications requiring precise timing measurements. Rising edge of the output pulse is accurate to +/-1usec with respect to the start of each GPS second. Introduction of GPS USB Driver Files
The USB GPS driver group consists of 6 files.
Files Name DRemover98_2K. exe
Description of Specific Property Type: Application This execution file removes GPS USB driver from the PC.
Serwpl. inf
Type: Setup Information This file provides major setup information.
Win2K\ser2pl. sys
Type: System File This file provides Windows 2000 and Windows XP hardware specific interface.
Win98_ME\ser9pl. sys Type: System File This file provides Windows 98 and Windows Millennium hardware specific interface. Win98_ME\serspl. inf Type: Setup Information This file provides Windows 98 and Windows Millennium setup information Win98_ME\serspl. vxd Type: Virtual Device Driver This file is virtual device driver.
29
Figure 1: Screen of GPS USB Driver Group
Figure 2: Screen of GPS USB Driver Win 2000 and Win XP System File
30
Figure 3: Screen of GPS USB Driver Win 98 and Win ME Group
31
B. Windows 98 Interface
1. Install GPS USB Driver Before the installation of GPS USB driver, there are three procedures required. The third thing is to plug the GPS receiver into the USB port of PC and then follow the installation guide.
32
Step 1: Click the "Next" button
Figure 4: Win 98 Automatic Installation Driver Screen
33
Step 2: Select "Automatically"and click the "Next" button
Figure 5: Win 98 Automatic Installation Driver Screen
34
Step 3: Specific driver location and click the "Next"button
Figure 6: Win 98 Automatic Installation Driver Screen
35
Step 4: Click the "Next"button
Figure 7: Win 98 Automatic Installation Driver Screen
36
Step 5: Click the "Finish"button
Figure 8: Win 98 Automatic Installation Driver Screen
37
2. Check Enable COM Port Number After you install GPS USB driver, you should know which COM port is available, and check enabled COM port number. You need to know the COM port assignment for the GPS receiver, when configuring map or chart software. Please notice that this remark is very important; if not configured properly, the mapping software will not communicate with the GPS receiver. To check your assigned COM port for the GPS receiver, please follow the instructions below.
Step 1: Check enabled COM port number by double-clicking the icon show in Figure-9, and then a dialog window shown in Figure-10 will be pop up.
Figure 9: My Computer Icon
38
Step 2: Double-click the "Control Panel" icon
Figure 10: My Computer Screen
39
Step 3: Double-click the "System" icon
Figure 11: Control Panel Screen
40
Step 4: Press"Device Manager" button
Figure 12: System Properties Screen
41
Step 5: Slect "USB to Serial Port" (COM3) and click "Propertes" button
Figure 13: System Properties Screen
42
Step 6: Browse COM3 properties
Figure 14: System Properties Screen
43
3. Remove GPS USB Driver If you want to update the USB driver, you should remove existing driver and install new one. Step 1: Remove GPS USB driver by double-clicking the icon show in Figure-15. A dialog window shown in Figure-16 will be pop up.
Figure 15: GPS USB Driver Remove Icon Step 2: Click "OK" button
Figure 16: Remove Driver Screen Step 3: Click "Yes"
Figure 17: Driver Remove Warning Screen
44
C. [. . . ] A dialog window shown in Figure-30 will be pop up.
Figure 29: GPS USB Driver remove icon
Step 2: Click "OK" button Figure 30: Remove Driver Screen Step 3: Click "Yes" button Figure 31: Driver Remove Warning Screen
55
D. Change COM Port Number Application Program
If the notebook assigns COM number to COM5, then can to execute SetCOM. exe for COM number change.
56
Step 1: For change COM port number assign by double-clicking the icon show in Figure-32, and then small icon shown in Figure-34 will be pop up.
Figure 32: SetCOM. exe Icon
Figure 33: Start bar on the right-below corner of screen
Figure 34: Start bar on the right-below corner of screen
57
Step 2: by clicking the icon show in Figure-34. a dialog window shown in Figure-35 will be pop up.
Figure 35: COM port number change screec
58
Step 3: for example change COM3 become COM4, first Click COM3 and COM4 then Click "Set" button
Figure 36: COM port number change screec
Step 4: Click "Yes" button Figure 37: Notification Screen
59
E. If your system is Windows Millennium, please refer to Windows 98 installation guide. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HAICOM HI-202E
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HAICOM HI-202E will begin.